30L Fuel Injector Digital Ultrasonic Cleaner With Heater 20C - 80C
Cleaning the Fuel Injectors
If the fuel injectors are restricted or leaking, there are several
options to clean them including:
1. A fuel injector-cleaning chemical that is poured into the fuel
Provides a noticeable difference in power and drive-ability after
one use. The disadvantages are that you can’t check the spray
pattern, and the filters may become plugged with contaminants freed
by the cleaner.
2. A cleaner that runs through the fuel rails and injectors.
Uses stronger chemicals that the in tank cleaners. Same
disadvantages as 1.
3. An ultrasonic injector cleaner and injector flow bench.
The preferred method of cleaning injectors. Cycles the fuel
injectors while the fuel injector tips are immersed in an
ultrasonic bath, which uses an environmentally friendly cleaning
fluid to clean the fuel injectors. The flow bench portion also
allows a user to perform a flow test before and after cleaning, and
it allows the user to observe the fuel injector spray pattern. This
method requires that the fuel injectors be removed from the engine.
What is ultrasonic cleaning?
Ultrasonic cleaning is an exceptional technique that facilitates
the cleaning process. It is an exceptionally thorough process which
cleans efficiently various items. This powerful process can perform
very detailed work quickly and successfully remove microscopic
particles from hard surfaces. External as well as internal
surfaces, blind holes and crevices, can be cleaned simultaneously
and uniformly. Greasy, oily and sticky parts are efficiently
cleaned with an ultrasonic cleaning unit.
- Car service: Flushing carburetors, injectors, injectors, fuel
filter mesh cleaning (petrol), individual parts, assemblies, and
- Medicine: Washing and polishing of optics, sterilization and
cleaning of surgical instruments, vials, dental and pharmaceutical
industries; cleaner reusable, molds.
- Engineering: Cleaning of parts, pipes, wires, etc. before
finishing, machining parts and components to the preservation,
processing of parts after reopening, welding, grinding, polishing,
cleaning strainers in the fuel and hydraulic systems, deburring
- Instrumentation: Washing and polishing of optics, precision
mechanics components, integrated circuits and printed circuit
|Ultrasonic Frequency||40,000 Hz|
|Ultrasonic Power||200-500 W|
|Heating power||600W strong power, quick heating|
|Unit Size||530 x 325 x 325 mm ( L x W x H )|
|Tank Size||500 x 300 x 200 mm ( L x W x H )|
|Package Size||635 x 405 x 390 mm ( L x W x H )|
|Power Supply||AC 100 ~ 120V, 50 / 60Hz|
AC 220 ~ 240V, 50 / 60 Hz
1. Ultrasonic power: 0-100% adjustable
2. Time setting: 0-30min or 24 hours continuous working
3. Heating: 20-80℃ adjustable
4: Ultrasonic frequency: 28 kHz or 40 kHz
5: Material: 2mm thickness SUS304 tank for acid-proof.
6: Improved PCB design for stable and durable industrial use
7: More strong and uniform ultrasonic wave
8: With free lid and stainless steel SUS304 basket
Other models for your choice:
|Model||Tank size||Unit size||Volume||Actual ultrasonic power||Rated ultrasonic power||Ultrasonic frequency||Heating power||Timer||Heating temperature|
Packaging & Shipping
1 x ultrasonic cleaner
1 x SUS basket
1 x SUS lid
1 x power cord
1 x English instruction manual
we have strong cooperation with DHL, TNT, UPS, FEDEX, EMS, China
You also can choose your own shipping forwarder
Ultrasonics: The ONLY Way to Clean with Confidence
Regardless of the source of the dirt or contamination, AG
Ultrasonic Cleaning Systems are designed to accommodate a wide
variety of uses in diverse industries. Fast, effective and
efficient, our machines will allow you to clean virtually any type
of part or component. The following is just a short list of the
many different types of items that have been cleaned using our
- Automotive (Car, Truck, Motorcycle) See Video Below
- Aviation (Helicopters, Aircraft and Ground Support)
- Personal Boat & Marine
- Injection Molds
- Restaurants, Bakeries & Kitchens (Oven Filters, Burners, Pots,
- Machines of All Types
- Tools, Nuts, Bolts
- Extrusion and Deburring
- Almost anything made out of metal (ferrous and non-ferrous),
plastic, vinyl, and wood.
What is the length of cleaning time?
Cleaning time will vary, depending on such things as soil,
solution, temperature and the degree of cleanliness desired. Highly
visible removal of soils should start almost immediately after the
ultrasonic cleaning action begins. Cleaning time adjustment is the
easiest (and most often misapplied) factor used to compensate for
process variables. Although new application cycle duration can be
approximated by an experienced operator, it usually must be
validated by actual use with the chosen solution and the actual
What is the purpose of the unit heater?
The primary purpose of the unit heater is to maintain a solution
temperature between cleaning cycles. The tremendous energy released
by cavitation will generate the heat for cleaning.
Why must baskets be used?
Items being cleaned should never be placed directly on the tank
bottom. Transducers (which produce the ultrasound) are sometimes
bonded to the bottom of the tank. Items resting directly on the
tank bottom can damage the transducers and/or reduce cavitation.
Additionally, a tray or beaker will position the item within the
optimal cleaning zone of the tank. The tray or beaker will also
hold the load together and allow for easy, no-touch removal,
draining and transport of the items to the next step in the
What is the optimum cleaning temperature?
Heat usually enhances and speeds up the cleaning process, and most
detergent solutions are designed to work best at an elevated
temperature. The best way to find the optimum temperature, which
will give you the fastest, cleanest and safest results, is to run
tests. Usually, the best results are within the 50°C to 75°C range.
Understanding Ultrasonic Power
When an ultrasonic cleaner is running electrical power is consumed
evenly but it is released in intervals to create the sound waves
that shape the ultrasonic signal. Some manufacturers report
ultrasonic peak power, others report average power, and some report
When comparing equipment you must compare based on the same
criterion otherwise you’d be comparing apples with oranges.
While more power usually indicates faster and more effective
cleaning, more power is not always better.
Too much power can damage electronic parts, the surface finish on a
soft metal (e.g. aluminum), and other delicate items.
For cleaning extremely sensitive items, adjustable power is a
Keep in mind that the larger the volume of solution, the more
ultrasonic power will be needed for cleaning.
Most cleaners run at an average power of 50 to 100 watts per
gallon, so the larger the tank the more power you need.Don’t
attempt to increase the effective power of an ultrasonic cleaner by
under-filling the tank.
Ultrasonic cleaner generators that power transducers are tuned to a
particular fill level.
Operating the unit with less fluid can damage the generator and
will result in less than optimized cleaning.