Mushroom Dryclean Press Machine Finishing Equipment Steam Heat Air
Operated To Press Topper
Designed for pants topping,themushroom dryclean press also performs
well on small garments and
quick touch-ups.Features two cylinders:one to close the press ,the
other to apply pressure.This allows
for high efficiency and long cylinder life
- Available in 19"and21".
- 2"vacuum valve maximizes forming capability.
|Compressed Air – NPT||3/8"|
|Compressed Air Pressure – psi(bar)||80(5.5)|
|Compressed Air Consumption|
free air/cycle at 80 psi – cu.ft.
|Steam Inlet/Outlet – npt||DN 15|
|Steam Pressure – psi(bar)||100(6.9)|
|Steam Consumption – bhp(kg/h)||0.64 (10)|
|Vacuum Size||1-1/4" (32)|
|Width – in (mm)||37 (940)|
|Depth – in(mm)||36.81 (935)|
|High – in(mm)||48.03 (1220)|
|Net Weight – lb(kg)||507 (228)|
|Shipping Weight – lb (kg)||611 (275)|
Laundry pressing Equipments, Dryclean presses, Finishing equipments
and laundry machine parts. Ironning machine belts ....
How to use the mushroom dryclean pressing machine?
Do not operate the press until the following five steps.
1. Open the stop valve in the steam return line.
2. Open the stop valve slowly, allowing the steam to gradually
enter the press.
3. When operating pressure is reached, open the press drain valve
in the return line and drain the
condensate into a bucket units steam flows freely. Then close the
stop valve tightly.
4. Open the air compressor.
5. open any air inlet valve to the press; check regulator for
The press is now ready for operation.
Do you know to install a pressing machine?All dryclean pressing
machine need to connect to vacccum dryset,see below pipeline