Corrugated Cartons Stripper For Cleaning Waste Scraps, Vibrator and
Conveyor For Waste Paper Eject
I. General introduction
The machine named vibrator, also called stripper. For corrugated
cardboard, it will be printed, slotted and diecutted on the front
machines. After diecutting, sometimes the cut off scraps will not
fall down which still on the cardboards. So after rotary diecutter,
usually equipped with vibrator machine for the cardboard cleaning.
Vibrator will clean the waste scraps through belts and vibration
tubes to flap the boards, then the scraps will be fall down. And
under the belts, there are conveyors, can output the scraps outside
This can make sure the corrugated paperboard easy to fold and glue
into cartons. Also make the working place more clean and tidy.
II. Machine details and functions
1. Integrated style structure: solid and stable. Install wheel
axle. Freely adjust work position.
2. Combined application design for chip-removing brush and
chip-removing blower can guarantee result of removing chip.
3. High elastic round belt has long service life and cannot damage
4. Height of belt and chip-removing brush can be adjusted.
5. Trash conveying unit: frequency conversion speed regulation can
freely adjust speed of trash cleaning.
6. Speed should be synchronous with printing die-cutting machine.
7. To conveyor the waste paper out of the machine by motor and
belt. The vibration device can adjust frequency and vibrate the
conveying belt to make waste scrap fall during conveying, air
blowing after belt to blow off waste scrap.
8. Two stage conveying belt, first one by pneumatic up/down and has
oscillator stripping, easy operate.
III. Technical parameters
Same as flexo printer rotary diecutter parameters
|Max. sheet size|
|Min. sheet size|
|Belt qty||10pcs or more as per customer need|