Cisco Catalyst WS-C2960-24TT-L Ethernet Switch
Format & Standards
IEEE 802.3ah (100BASE-X single/multimode fiber only)
IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p CoS Prioritization
IEEE 802.1Q VLAN
IEEE 802.3 10BASE-T specification
IEEE 802.3u 100BASE-TX specification
IEEE 802.3ab 1000BASE-T specification
IEEE 802.3z 1000BASE-X specification
Ports & Interface
24 Ethernet 10/100 ports and 2 10/100/1000-TX uplinks
Primary Port Speed
10/100Mbps Ports + 1000Mbps Uplinks
MAC Address Table
Up to 8000
64 MB DRAM
32 MB flash memory
IEEE 802.1x allows dynamic, port-based security, providing user
IEEE 802.1x with VLAN assignment allows a dynamic VLAN assignment
for a specific user regardless of where the user is connected.
IEEE 802.1x with voice VLAN permits an IP phone to access the voice
VLAN irrespective of the authorized or unauthorized state of the
IEEE 802.1x and port security are provided to authenticate the port
and manage network access for all MAC addresses, including those of
IEEE 802.1x with Guest VLAN allows guests without 802.1x clients to
have limited network access on the guest VLAN.
Port-based ACLs for Layer 2 interfaces allow application of
security policies on individual switch ports.
Unicast MAC filtering prevents the forwarding of any type of packet
with a matching MAC address.
Unknown unicast and multicast port blocking allows tight control by
filtering packets that the switch has not already learned how to
SSHv2 and SNMPv3 provide network security by encrypting
administrator traffic during Telnet and SNMP sessions. SSHv2 and
the cryptographic version of SNMPv3 require a special cryptographic
software image because of U.S. export restrictions.
Bidirectional data support on the Switched Port Analyzer (SPAN)
port allows the CISCO Secure intrusion detection system (IDS) to
take action when an intruder is detected.
TACACS+ and RADIUS authentication enable centralized control of the
switch and restrict unauthorized users from altering the
MAC address notification allows administrators to be notified of
users added to or removed from the network.
DHCP snooping allows administrators to ensure consistent mapping of
IP to MAC addresses. This can be used to prevent attacks that
attempt to poison the DHCP binding database, and to rate-limit the
amount of DHCP traffic that enters a switch port.
10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5
unshielded twisted-pair (UTP) cabling
100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling
1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP
1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5
1000BASE-SX, -LX/LH, -ZX, -BX and CWDM SFP-based ports: LC fiber
connectors (single/multimode fiber)
100BASE-LX, -BX, -FX: LC fiber connectors (single/multimode fiber)
Per-port status: Link integrity, disabled, activity, speed,
System status: System, RPS, link status, link duplex, link speed
Maximum Power Consumption: 30W
AC Input Voltage and Current: 100-240VAC (autoranging), 1.3-0.8A,
Power Rating: 0.05kVA
DC Input Voltages (RPS Input): +12V at 5A
1 RU fixed-configuration, multilayer switch
Entry-level enterprise-class intelligent services
LAN Base Image installed
Ease of Use and Deployment
Superior Redundancy for Fault Backup
16 Gbps switching fabric
Forwarding rate based on 64-byte packets: 6.5 Mpps
Dimensions & Weight
17.5" x 9.3" x 1.7"
0ºC to 45ºC (32ºF to 113ºF)
10 to 85% (noncondensing)
For most updated manufacturer warranty, please go to www.cisco.com.
|Delivery Options||Estimated Delivery Time|
Please note: Above mentioned information are just for your
reference only,we will keep you posted for the tracking delivery
Return Material Authorization (RMA) Process
If your Cisco products failed, you must contact your sales
representative to verify product failure. If the problem still
can't correct by remote support methods i.e. email or phone
support, the RMA procedure will issue.
Wire Transfer/Money Gram/Western Union