Dry Air Generator For Transformer Maintenance, supply dry air during
maintenance inside transformer,safe and effective
I. Description of Dry Air Generator
NSH ADK series applies for dry air supply on maintenance work of
transformers, reactors and other large electrical equipment. It is
an alternative to the traditional transformer hot oil circulation
drying methods. It also applies to air dry and cycle dry for
warehouse, packaging, electronics and other industries. It is
particularly suitable to dry hydrogen in the hydrogen gas cooling
system of the generator sets, as well as drying of the SF6 gas in
With Compressed Type Dry Air Generator for Transformer Maintenance,
you can save time for maintenance and get good efficiency.
II. Features of Dry Air Generator
1. Remove moisture in the air
2. Remove particulates in the air
3. When the transformer is operating overnight, instead of filling
with nitrogen or drying with hot oil
4. Supply dry air to ensure that the transformer is dry inside when
the transformer is installed and repaired
5. Fill cylinder with dry air
III. Technical Specification of Dry Air Generator
|Working Pressure||Mpa||0.6 ~ 0.8|
|Power Supply||380V,50Hz, 3P|
|Discharge Pressure||Mpa||0.02 ~ 0.03|
|Dew Point||℃||-50 ~ -70|
|Oil Content at air outlet||PPM||0.01|
V. Available Style
1. Fixing type or mobile type with four wheels.
2. Normal appearance type,shelf-covering type.
3. Avaliable in different color.
VII. Relative Series:
VFD series: Insulation oil purifier System specialize in purifying branded
oil, insulation oil of high voltage and super high voltage
transformer. Additionally, it is suitable for treating low
viscosity lubrication oil.
TF series: Turbine oil purifier system is particularly suitable for
purifying turbine lubricating oil. It also applys to treat
hydraulic, coolant oil and other lubrication in which contain large
of water, vapor, impurities, sludge, dielectric and colloid. It can
eliminate them effectively and efficiently.
LV series: Lubrication Oil Filter System are suitable especially for
purifying and restoring hydraulic oil, machine oil, coolant oil and
various other lubrication oil.
GER series: Used oil regeneration system is suitable to regenerate used
internal-combustion engine oil including diesel engine oil,
gasoline engine oil, and used hydraulic oil, other used lubrication
oil of machinery.
GED series: it is used to recycle all kinds of waste oil into base oil or
diesel oil with high quality.