Intelligent 1 door access control panel Interlock function with
Software management TCP/IP and RS485 network
Access Systems are built on flexible, open technology to provide
management, real-time monitoring, and control of your access
control system- all from a browser, with no additional software to
install. The GD-K1 can communicate at 38.4 Kbps via RS-485 configuration or
Ethernet TCP/IP networks. It can store up to 30,000 cardholders.
SDK (Software Development Kit) is available for customer to
integrate the controller into existing access control software or
to develop new software.
1. B/S structure software
It is easy to manage the system by browser from client PC. There is
no need to install software on each client.
2. Normal open after first punch card can be setup
3. Real-time Monitoring of Door status
Using the management software, it allows real-time monitoring and
control of door open and closing of the whole system.
4. Simple Access Control System Configuraiton
5. Multiple hardware protection measure
There are over-current protection, over-voltage protection,
reversal protection for the power supply and all the input and
6. Integration with Other Security Systems
C3-100 can be integrated with other security systems such as CCTV,
fire alarm, BAS (building automation system) and other systems to
configure total security system.
7. Supports different wiegand reader
The controller supports different wiegand format, and can connect
to different reader, including ID card reader, Mifare card reader
and HID reader etc.
8. Input/ Output Ports to Control Doors
Connect with variety of sensors, alarms, exit buttons, electric
lock and other devices.
9. Variety of Communication Function
Using either serial or TCP/IP communication, it provides reliable
10. Interlock Function
11. Multi-card operation:
This function is used to manage visitors or to manage some special
high secure place. The doors are opened whten appointed number
registered cards are read together.
13. Duress Mode
14. SDK available
The system integrator can use the SDK to integrate the hardware
into their existing access control software system or to develop a
|LED Indicator||Yes, LED indication for communication, power, status and punch card|
|Operating Humidity||10% to 80% relative humidity non-condensing|
345(W)*275(H)*70(D)(with power supply and metal box)
|Power/Current||DC 9.6-14.4V, Rated Max. 1A|
|Reader Port||2ea (26/34bit Wiegand, 8bit Burst for PIN)|
|CPU||32bit MIPS CPU|
|Flash Memory||256M bits|
|Baud Rate||38,400bps (Recommended)/9600bps,19,200bps, 57,600bps (selectable)|
|Input Port||2ea (Exit Button#1, Door Sensor#1)|
1ea(1FORM-C Relay Output, SPDT 5A@36VDC/8A@30VAC)
1ea (1 Aux FORM-)