Home > Springs >

Built-in battery lora datalogger temperature humidity sensor temperature and humidity digital LCD display wall mounted

Categories wireless temperature humidity sensors
Brand Name: thingsend
Model Number: XZ-DS01-TH2C
Place of Origin: China
MOQ: 1pc
Price: USD60-70/pc
Payment Terms: T/T, Western Union,Payapal
Supply Ability: 10000pc/month
Delivery Time: 1-3working days
Packaging Details: standard
Accuracy: temperature<0.5℃ and humidity<3%
Life span: more than 5 years
Frequency: 433mhz/450mhz/470mh
  • Product Details
  • Company Profile

Built-in battery lora datalogger temperature humidity sensor temperature and humidity digital LCD display wall mounted

Product characteristics

● Install and work, with LCD display;

● Cycle detection, cycle can be set

● Automatic registration, adapt to the concentrator;

● Automatic routing, adapt to repeater;

Built-in 3pcs AA batteries, 2-5 years battery lifespan (depending on acquisition cycle);

● wireless transmission up to 5km

● Pressing-key setting, give an alarm when exceeding threshold value;

● Centralized acquisition, multi-mode output.

● High-precision temperature and humidity acquisition: temperature <0.5 °C, humidity <3%;

Operation process

1.Key Setting Function

12

Key No.1 to Key No.5 is counted from left to right;

Key No.1Key No.2Key No.3Key No.4Key No.5
Clock setMode switchTrigger set/Setting bit switchValue +Value -

2.Key-setting function Instruction

KeyDefinitionDescription
Key No.3Trigger set/setting bit switchAfter power-up, short press this key to enter setup mode, LCD backlight will light up. If no other key is pressed within 4 seconds, it will automatically exit the setting mode and trigger the wireless data transmission. In setting the alarm threshold mode, pressing this key will switch the high and low bits of the value. In the clock setting mode, the clock's minutes and seconds can be switched and the threshold value can be quickly set.
Key No.2Mode switchIn the setting mode, short press the key will cycle into following setting scenario: the upper temperature threshold, the lower temperature threshold, the temperature alarm back-off value, the humidity upper threshold, the humidity lower threshold, and the humidity alarm back-off value. In any of these scenarios, various thresholds can be quickly set by pressing key No. 3, No. 4 and No.5
Key No.4Value +Temperature plus/minus sign bit/ increment of selected value(0~9)
Key No. 5Value -Temperature plus/minus sign bit/decrement of selected value(0~9)
Key No. 1Clock setIn the setting mode, enter the clock setting function, the clock is 24 hours

3.Key setting temperature upper/lower threshold, humidity upper/lower threshold, temperature alarm back-off value, humidity alarm back-off value, real time clock

3.1 Key setting temperature or humidity upper limit alarm threshold

  • Setting step 1: Press key No.3 shortly to enter key setting mode. At this time, the LCD backlight is lit.
  • Step 2: Shortly press key No.2 to switch the setting items.The positive/negative sign of the temperature/humidity upper limit alarm value starts to flash, and the upper triangle mark appears.
  • Step 3: Shortly press key No.3 to quickly switch the ten, one and decimal places of the set value.
  • Step 4: Shortly press key NO.4 or key No.5 to increase/decrease the set value.

TH2C_

3.2 Key setting temperature or humidity lower limit alarm threshold

  • Setting step 1: Press key No.3 shortly to enter key setting mode. At this time, the LCD backlight is lit.
  • Step 2: Shortly press key No.2 to switch the setting items.The positive/negative sign of the temperature/humidity upper limit alarm value starts to flash, and the lower triangle mark appears.
  • Step 3: Shortly press key No.3 to quickly switch the ten, one and decimal places of the set value.
  • Step 4: Shortly press key No.4 or key No.5 to increase/decrease the set value.

2C-2_

3.3 Key setting the temperature or humidity alarm back-off threshold

  • Setting step 1: Press key No.3 shortly to enter key setting mode. At this time, the LCD backlight is lit.
  • Step 2: Shortly press key No.2 to switch the setting items.The tens digit of the temperature/humidity alarm back-off threshold starts to flash, and the up/down triangle mark appears.
  • Step 3: Shortly press key No.3 to quickly switch the ten,one, and decimal places of the set value.
  • Step 4: Shortly press key No.4 or key No.5 to increase/decrease the set value.

2C-3_

3.4 Key setting the real-time time

  • Setting step 1: Press key No.3 shortly to enter key setting mode. At this time, the LCD backlight is lit.
  • Setting step 2: Shortly press key No.1 to enter the clock setting mode, and tens digits of the hour flash.
  • Setting step 3: Shortly press key No.3 to quickly switc the tens digits and units digit of the set value
  • Setting step 4: Shortly press key No.4 or key No.5 to increase/decrease the set value

2c-4_

Data Protocol

Example:GW_ID:45658,TYPE:T&H,ID:1100001002,STAT:00000001,T:24.0℃,H:92.8%,ST:30M,V:3.50v,

SN:109,RSSI:-106dBm,E:160.2020,S:110.2020,Time: 2018-2-4 14:20:39,T_RSSI:-91dBm

Explain:

GW_ID: collector ID (45658)TYPE: T&H(temp&humidity sensor)ID: sensor address(1100001002)

STAT: sensor status word

BIT7=1 trigger and report; BIT6= 0CH,1CH; BIT5=1 repeater; BIT4=1 invalid data;

BIT3= reserve; BIT2=1 searching for network; BIT1=0, low speed,1high speed; BIT0=1start

T:environmental temperature 24.0℃H: environmental humidity 92.8%ST: reading time interval 30mins
V: battery voltage 3.50VSN: sending serial No. 109RSSI: wireless signal strength -106dBm
East longitude E: 160.2020, Northern latitude N:110.2020Time: 2018-2-4 14:20:39
T_ RSSI: sensor receiving signal strength -91dBm

Technical Parameters

Sensor parameterBasic Parameter
Temperature Accuracy:<0.5℃(0℃~80℃)& < 2℃(-40℃~0℃)Working frequency:476.505 & 488.505MHz(frequency can be customized)
Humidity Accuracy:< ±3%Transmitting power:<17dBm
Acquisition cycle :5~240minsTransmitting current:<120mA
Working temperature:-40~80℃Transmission distance:>5KM(LOS)

Working Life-Span: > 5years Static sleeping current:10±0.5uA;

Note: Over 80% effective communication distance, working life is related to acquisition period (1 year @ 5 minutes, 5 years @ 30 minutes)


Applications

Environmental monitoring, medical and health, energy and chemical industry, warehousing and transportation, cold storage chain, constant temperature and humidity workshop, office space and other fields.


Remark:

1.The sensor doesn't include battery for convenient shipment.User need put 3pcs standard No.5 AA battery inside the sensor when using it

2.The sensor can be used alone,if need acquisit data and send data to cloud server,then user also need buy a gateway:


Welcome to contact Sarah if have any questions. sales(at)thingsend.com


Quality Built-in battery lora datalogger temperature humidity sensor temperature and humidity digital LCD display wall mounted for sale
Send your message to this supplier
 
From:
To: Shenzhen Xinzhitongxin Technology Co.,Ltd
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly