Boiler Seamless Carbon Steel Pipe , Round Steel Pipe A106 Grade A
XOOS is supplying a comprehensive range of ASTM A106 Grade A carbon
steel seamless pipes for the right technical solution.
1. Ordering Information
Quantity (feet, meters, or number of lengths),
Name of material (seamless carbon steel pipe),
Grade (Grade A),
Manufacture (hot-finished or cold-drawn),
Size (NPS/DN and weight class or schedule number, or both; outside
diameter and nominal wall thickness; or inside diameter and nominal
Special outside diameter tolerance pipe,
Inside diameter tolerance pipe, over 10 in, (250mm) ID.
Length (specific or random),
Test report required,
2. Available Size Range
*If the steel grades and size you are looking for are not listed
above, please contact us for further information.
ASTM A106 Standard Specification for Seamless Carbon Steel Pipe for
Oil, Gas and water delivery;
Refinery, Boiler and Mechanical equipment manufacture;
Structure construction; drilling, ship building and etc.
5. Chemical Requirements
A For each reduction of 0.01% below the specified carbon maximum,
an increase of 0.06% manganese above the specified maximum will be
permitted up to a maximum of 1.35%.
B Unless otherwise specified by the purchaser, for each reduction
of 0.01% below the specified carbon maximum, an increase of 0.06%
manganese above the specified maximum will be permitted up to a
maximum of 1.65%.
C These five elements combined shall not exceed 1%.
6. Mechanical Properties
Tensile Strength, min: 48ksi/330MPa
Yield Strength, min: 30ksi/205MPa
7. Manufacturing Process
Raw Material Inspection → Cold Centering → Heating → Piercing &
Rolling → SIzing → Heat Treatment → Testing → Finishing → NDE →
Visual & Dimension Inspection → Marking → Storing &
8. Heat Treatment
Hot-finished pipe need not be heat treated. Cold-drawn pipe shall
be heat treated after the final cold draw pass at a temperature of
1200°F(650°C) or higher.
9. Supplementary Requirements
S1 Product Analysis
S2 Transverse Tension Test
S3 Flattening Test, Standard
S4 Flattening Test, Enhanced
S5 Metal Structure and Etching Test
S6 Carbon Equivalent
S7 Heat Treated Test Specimens
S8 Internal Cleanliness-Government Orders
S9 Requirements for Carbon Steel Pipe for Hydrofluoric Acid