Metal Fiber Laser Cutting Machine 1KW for All Kinds of Metal
1.The strong frame is completely welded, high temperature annealing
and stress relief treatment to ensure no deforming.
2. Imported high precision ball screw transmission / rack &
pinion, high precision linear guide rail.
3. Imported servo motor and drive, imported high-rigidity precision
Equipped with auto-lubrication device, with dust removal and smoke
extract system in cutting area.
4.Modular structure of laser generator, high performance and free
Professional laser cutting software, easy, convenient and smart to
operate, easily design all kinds of graphics and texts for cutting.
Advantages over Other Cutting Machines:
1. The super high photo-electric conversion efficiency can be up to
about 30%. So the machine runs with the lowest power consumption
compared to other laser cutting machines under the same output
power. So the cutting cost is the lowest.
2. With laser beam of good quality from double-clad fiber(DCF), the
focus spot is superfine, and the cutting seam is very even and
fine. Then the efficiency can be higher, and the quality is better.
3. The surface-area-to-volume ratio (SVR) of the gain medium is
4. The light path is totally composed of fiber laser and fiber
laser units, which are combined together based on cable splicing
technology. And the whole light path is enclosed in fiber laser
5. No laser working gas and can start cutting just by blowing air.
And fiber optic transmission requires no need of reflector mirrors.
In a word, the machine saves maintenance costs greatly.
6. The efficiency is very stable and reliable by adopting the diode
pump laser module. No need to adjust the light path. So it’s easy
to operate and maintain the machine.
7. Key units have the working life of 100 thousand hours.
8. High output power from 200 to 4000w can be customized.
9. The machine costs little water and energy. And the machine
requires no gas. So the running cost is lower.
What Materials Can our Machine Cut ?
|1000W fiber laser cutting machine cutting parameters|
|Cutting gas||Cutting pressure||Nozzle||Collimator / Focus|
|Carbon steel||0.5||30-40||Air||6||1.5 single layer||75/125|
|0.8||20-25||Air||8||1.5 single layer||75/125|
|1||18-22||Air||10||2.0 single layer||75/125|
|2||5-6.5||Oxygen||3.5||1.2 double layer||75/125|
|3||3-3.5||Oxygen||0.5-1||1.2 double layer||75/125|
|4||2-2.3||Oxygen||0.5||1.2 double layer||75/125|
|5||1.5-1.8||Oxygen||0.5||1.2 double layer||75/125|
|6||1.2-1.4||Oxygen||0.5||1.5 double layer||75/125|
|8||0.9-1.2||Oxygen||0.5||2.0 double layer||75/125|
|10||0.7-0.8||Oxygen||0.5||2.5 double layer||75/125|
|12||0.5-0.65||Oxygen||0.5||2.5 double layer||75/125|
|Stainless steel||0.5||30-40||Nitrogen||7||1.5 single layer||75/125|
|0.8||22-25||Nitrogen||10||1.5 single layer||75/125|
|1||20-23||Nitrogen||12||1.5 single layer||75/125|
|2||6-7||Nitrogen||15||2.0 single layer||75/125|
|3||2.5-2.8||Nitrogen||18||2.0 single layer||75/125|
|4||0.8-1.2||Nitrogen||18||2.0 single layer||75/125|
|5||0.6-0.8||Nitrogen||18||2.0 single layer||75/125|
|Aluminum||0.5||20-25||Air / Nitrogen||8||1.5 single layer||75/125|
|0.8||15-18||Air / Nitrogen||9||1.5 single layer||75/125|
|1||10-12||Air / Nitrogen||12||1.5 single layer||75/125|
|2||3-3.5||Air / Nitrogen||18||2.0 single layer||75/125|
|3||1-1.5||Air / Nitrogen||18||2.0 single layer||75/125|
|Brass||0.5||22-30||Nitrogen||12||1.5 single layer||75/125|
|0.8||13-17||Nitrogen||12||1.5 single layer||75/125|
|1||10-12||Nitrogen||15||1.5 single layer||75/125|
|2||2-3||Nitrogen||18||2.0 single layer||75/125|
|3||1-1.3||Nitrogen||18||2.0 single layer||75/125|
|Copper||0.5||15-18||Oxygen||12||1.5 single layer||75/125|
|0.8||8-12||Oxygen||12||1.5 single layer||75/125|
|1||5-7||Oxygen||12||1.5 single layer||75/125|
|2||0.8-1.2||Oxygen||15||2.0 single layer||75/125|
Applied materials of 1000W Fiber Laser Cutting Machine
Fiber cutter is mainly used for carbon steel cutting, mild steel,
stainless steel, silicon steel,aluminum alloy, titanium alloy,
galvanized steel sheet, pickling board, aluminum zinc plate, copper
and many kinds of metal materials. It is an cnc laser cutters can
be used to do high precision cutting. It also can be called fiber
cutter machine,fiber optic laser cutter,laser cutter for
metal,fiber cutter,carbon steel cutting,cnc laser cutters.
|Laser Source||Fiber Laser Source 1000W|
|Gear and Rack||Germany|
|Guide Rail||Taiwanese HIWIN|
|Max cutting speed||40000mm/min(according to materials)|
|Working voltage||AC220V/110V±10% 50HZ/60HZ|
|Min line Width||≤0.12mm|
|Transmission||Yaskawa servo 850W+FASTON reducer|
|Z axis||Yaskawa 400W+brake|
|Structure||10mm Thickness Welded steel tube,Aluminium Alloy Gantry|
Applied Industry of 1000W Fiber Laser Cutting Machine
This laser cutter for metal is applied in sheet metal processing,
aviation, spaceflight, electronics, electrical appliances, subway
parts, automobile, machinery, precision components, ships,
metallurgical equipment, elevator, household appliances, gifts and
crafts, tool processing, adornment, advertising, metal foreign
processing various manufacturing processing industries.