1-10 HZ Adjustable Q-switch ND YAG Solid-state Laser with 3
Therapy of epidermis and dermis pigmentation-----Utilizing the
explosive effect of the Nd: YAG laser, the laser permeate the
epidermis into the dermis which includes amount of pigment mass.
Since the laser pulses in nanosecond but with super high energy,
the shot pigment mass swell quickly and breaks into small pieces,
which will be eliminated through metabolic system.
Therapy of the dilatation of capillary vessel---- Utilizing the
heat effect of the Nd: Yag Laser, the laser is absorbed by the
hemachrome in the capillary vessel, and then the capillary vessel
become blocked and disappear.
The Q-Switched Nd:YAG laser delivers light of specific wavelengths
with high energy which are absorbed by the pigment in the tattoo and result in an
shockwave. The shockwave shatters the pigment particles, releasing them from their
encapsulation and breaking them into fragments small enough for
removal by the body. These tiny particles are then eliminated by
the body. Since this specific wavelength can only be absorbed by pigment
particles, no injury to skin and normal tissues will occur.
532nm wavelength: get rid of freckles, eyebrow tattoo, failed eye line
tattoo, tattoo , lips line, pigment, telangiectasia in shallow red,
brown and pink and etc. light color
1064nm wavelength: get rid of freckles and yellow brown spot, eyebrow
tattoo, failed eye line tattoo, tattoo, Birthmark and Nevus of Ota,
pigmentation and age spot, nevus in black and blue, scarlet red,
deep coffee and etc. deep color.
1.Carbon powder as exogenous artificial pigment it has strong
adsorption ability, can absorb deep dirt in pore and also has
inhibition antiphlogistic effect to acne skin acne bacillus
2.Cellular injury were confined to carbon powder closely adjacent
tissues, and has nearly no effect to non- target tissue
3.Apply nano carbon powder on the face, let it penetrate into
pores, laser break it into pieces. shattering dirt and epidermis
cutin: produced high energy transmission to the dermis, fully
stimulate skin cell updates and vigor, stimulating collagen fibre
and elastic fiber repair, using skin natural repair function,
launch new collagen orderly deposition andarrangement, thus realize remove
wrinkles, shrink pore, smooth skin, make skin restore
1. Spot size: 1-8mm adjustable
2. Pulse energy: 100-2000mj
3. Pulse Rate: 1-10 Hz, each time can add by 1 Hz
4.7-Articulation Joint Spring Arm
5. Will not destroy hair follicle, will not injure ordinary skin
6. Suitable to all kinds of skin color people
7. Water temperature and water flow alarm system, keep machine from
8. 532nm, 1064nm, treatment heads make sure it suit for all kinds
of tattoo and pores.
|Voltage||220V, 10A, 60HZ;110V, 10A, 50HZ|
|Output mode||Q-switch Pulsed output|
|Wavelength||1064nm, 532nm, 1320nm|
|Single Pulse energy||100mj-2000mj|
|Safety distance||NOHD 1km. Operator must wear goggles|
|Cooling system||Water cooling|
|Work mode||Continually work with intervals|
|Spot Size||1-8mm adjustable|
|Guide light beam||650nm red laser|
1. Can you treat all colours?
No. Light is measured in nanometres and there are two wavelengths
of light that are emitted from this
laser C one is invisible infrared light (1064nm) and the other is
visible green light (532nm). The infrared
wavelength is preferably absorbed into black and dark blue inks,
whereas the green light is absorbed by
red ink. It is possible to treat some other colours although white,
yellow and bright colours are difficult.
This is not usually a problem however, as lighter colours cover
very easily. If you wish to cover-up an
existing tattoo then the darker colours will be faded or removed,
allowing you greater choice of size and
colour of the cover- up design you choose.
2. Will the tattoo be removed in one treatment?
No, that is very unlikely. The light can only shatter a certain
amount ink in one treatment, so several
treatments are needed at 4-6 weekly intervals to work through the
layers. You will notice the tattoo fades more and more with every
treatment you have. A test patch will be performed before a full
session goes ahead to check how you react to the treatment. A
professional tattoo can take between 4 C 5 treatments and sometimes
only take 1 or 2. There are several factors that influence the
number of treatments required, these can be down to how easily you
heal, how deep the ink is in the skin, and the types of ink that
were used. Generally speaking the longer you have had the tattoo
and the darker it is, the easier it is to remove.
3. What happens to my skin after treatment?
The immediate after effect of the treatment is that the skin turns
temporarily white, this is due to water
evaporation and disappears with an hour or two. The skin also
swells and feels like mild sunburn, this
usually disappears within 24-48 hours. It may blister too. The body
continues to remove ink after the
treatment and the skin is usually back to normal within a few days.
4. Are there any side affects?
Sometimes if you use too high energy, bleeding and/or blistering
can occur. Especially for lady's skin, very weak. So you just need
to use the energy that can make the tattoos become white, begin
from our original energy.
5. Will the laser treatment scarmy skin?
No. If bleeding or blistering does occur it is very important not
to pick any scabs that may result when the skin is healing C this
could cause scarring, and should be avoided as scar tissue can make
further treatments more difficult.
Taibo beauty Company is the professional manufacturer of beauty
equipment, medical equipment, Skin rejuvenation System Beauty Salon
products and so on. Now we developed IPL series, SHR, E-light, Co2
fractional laser, 808nm diode laser, ultrasonic cavitations,
fractional RF and hair re-growth laser, 980nm diode laser vascular
removal, High frequency, HIFU skin tightening, HIFU slimming, Water
oxygen jet peel, q switch nd yag laser, etc.
Warranty & Services
|Service:||1. 2 year warranty for the mainframe without charges for components
change or repairing. Lifetime maintenance without any charge.|
|2. Free training for operation of the equipment in our company,
which provided by our specialized training department.|
|3. On-line services, for example, technical consultancies provided
by our skilled technique group concerning any question of the laser
equipment, and after-sale maintenance and more.|
|4. OEM/ODM services are available. We have our own developing and
design department and manufacturing line, which ensure your
required beauty equipment|
RoomB-605 Haibo Plaza FengCheng 9 Road Xi’an Shaanxi Province
Company: Xi'an Taibo Electronic Technology Co. Ltd.