Water gas, PE pipe extrusion machine line, PE plastic pipe making
Description of Single screw extruder PP PE pipe production line:
Yurefon Machinery depends on design production experience of many
years; join the domestic and international actual circumstance,
developed full-automatic production line, which from extruder
including all automation units and peripherals, whole production
line realizes automatic control from charging to finished product.
PE pipe production line, HDPE plastic pipe making machine is unique
in design, it adopts BM disconnect-type high-efficiency screw and
is high in automation, convenient for operation and stable and
reliable in continuous production. The manufactured plastic
cracking resistance and creep resistance
Technical parameter of Single screw extruder PP PE pipe production
|Type||Pipe Spec(mm)||Extruder||Max. output (kg/h)|
Process of Single screw extruder PP PE pipe production line:
Material + Color Master-batch → Mixing → Vacuum Loading → Raw
Material Drying → Single Screw Extruder → Color Line Extruder →
Mold → Vacuum Forming Tank → Spray Cooling Water Tank → Crawler
Haul-Off → Planetary Cutter→ Stacker → Completed Product Inspection
The Feeder used to feed material into the extruder, usually using a
vacuum feeder to feed pellets into the extruder.
Single Screw Extruder
Usually recommends two single screw extruders in this case: the
larger extruder used to extrude the actual pipes while the smaller
extruder used to extrude the colored mark line. This is the
integral part of the entire extrusion line and Yurefon only uses
the finest quality extruders to insure reliability and performance.
Mould (Die Head)
The mould is another essential part of the HDPE extrusion line.
Mould defines the shape and diameter of the PE pipes. The quality
of the extruded pipes are largely depending on quality of the mold
Vacuum Calibrating and Cooling Tanks
High quality Vacuum calibration and the cooling tanks give produced
PE pipes a better looking exterior. An extra set of vacuum
calibrators and cooling tanks are required when extruding pipes
with larger diameters.
Water Cooling Tanks
The pipes extruded from the mould (die head) is extremely hot. Even
after going through vacuum calibration and the cooling tanks, they
will still need to be further cool. The water cooling tanks in this
case further cool down the pipe through water. Usually, the larger
the diameter of the pipes been extruded, the larger the
water-cooling tank will need to be.
The Haul-off unit used to move the pipe forward, the particular
make and model of the haul-off unit depends on the quantity of the
Yurefon’s pipe machine cutter completed automated and controlled
digitally. The interface designed for ease to use and with great
performance in mind.
Winder or Stacker
A winder used in smaller diameter PE pipes production, those small
diameter PE pipes are flexible enough to coil around a winder, and
thus essentially allow unlimited length for produced pipe.
A stacker is recommended in larger diameter case, usually above 63
mm, in this case produced PE pipes are stacked together efficiently
on stacker, waiting for final packaging and transportation.