Tobee® TH slurry pump are the most comprehensive range of centrifugal slurry pumps for
use in mining, chemical and general industry applications. The
horizontal slurry pumps are designed for heavy duty applications
such as mill discharge, power sector and tailings as well as
specialty applications, which are used for continuous pumping of
high abrasive, high density slurries.
Size (discharge): 1" to 22" Pump
Capacity: 10.8~ 5400 m3/hr
Head: 6m ~ 135 m
Handing solids: 0 ~ 650mm
Concentration: 0%~ 70%
Material:High chrome alloy,Rubber,Stainless steel etc.
1. Horizontal, cantilevered, centrifugal, single stage slurry pump.
2.Long bearing life: The bearing assembly is with large diameter
shaft and short overhang.
3. Wear resistant and anti abrasion wet parts: High chrome alloy
and rubber etc. They are completely interchangeable with each
4. Easily replaceable liners: Liners are bolted to the casing.
5. Easy adjustment of impeller: An impeller adjustment mechanism is
provided below the bearing housing.
6 Discharge direction can be positioned at intervals of 45 degrees.
7. Simple maintenance throat bush: the mating face of the throat
bush is tapered, so the wear is reduced and removal is simple.
8. Sealing type: pcking seal,impeller sealing and mechanical seal.
9. Widely application: They are designed for handling abrasive,
high density slurries in the metallurgical, mining, coal, power,
building material and other industrial departments.
Tobee® TH Slurry Pump Performance Parameter:
|Material||Clear water performance|
Tobee® TH Slurry Pump Component Diagram:
Tobee® TH Slurry Pump Structural Drawing:
Tobee® TH Slurry Pump Shaft Seal:
As one of the most commonly used seals for rotating shafts, the
packing seal can come with low-flush or full flush arrangement
which uses flushing water to prevent media from escaping the pump
housing. This kind of seal is suitable for use under all pumping
conditions. In situations where corrosive solids or high
temperature might be encountered, Teflon or aramid fiber is used as
the packing material for the gland. For high abrasion conditions, a
ceramic shaft sleeve is available.
The combination of impeller and expeller creates the pressure
needed to seal against leakage. Together with the gland seal or lip
seal which is used as the shut-down seal, this type of seal can
handle sealing requirements for applications where full-flush gland
seal is impractical due to lack of water on the site, or sealing
water is allowed to enter inside the pumping chamber to dilute the
TH series heavy duty slurry pump utilizes a leak-proof mechanical
seal design which allows easy installation and replacement. Other
types of mechanical seal are among options to suit the slurry pump
for various pumping applications.
Tobee® TH Slurry Pump Drive Type
Tobee® TH Slurry Pump Quality Control:
|Stages of manufacture||Quality cotrol activities|
|Raw material arrival||Sampling, material chemical analysis|
|Casting and composition||Material material chemical analysis of pump parts|
|Casting quality inspection|
|Key component machining||Dimension precision inspection|
|General assembly||Procedure operaion|
|Hydraulic static test|
|Performance test of pump unit||Capacity and head|
|Vibration and noise|
|Final inspection||Packaging of pump unit|
|Spare parts and accessories|
Tobee® TH Slurry Pump After-sales Service:
As the slurry pump wet ends parts such as the impeller,volute
liner,FPL insert,Throat bush are consumption parts and we could
provide you always the qualified slurry pump parts within very
Packing Transport Services
Considering the order pump size and we could provide case or pallet
as per your need to make sure it safe enough during the long
distance road and ocean shipping.have its own export company and so
we could help you find the best ocean shipping solution and service
for you from the goods out of factory to your destination.
Tobee Pump have more than 30 years experienced pump installation
workers and are very aware of any onside application.We could
provide abroad pump installation service and expect pump
manufacturing and sales,abroad pump installation is getting more
and more popular by our regular clients abroad.
Technical Support Services
Technical data sheet,Performance curve,General arrangement
drawing,Operating manual will be sent within 24th for your
checking, So Pls feel free to contact us If you have any need.
Tobee® TH Slurry Pump On-Site Application:
1)Mine:Black, non-ferrous ore slurry material pump and all kinds of
concentrate and tailings conveying.
2)Metallurgy:Transport various slurry for aluminium or steel manufacture.
3)Coal: Coal mining, washing and various coarse and fine coal slurry
4)Electricity:Remove power plant ash,wash ash,various ash dregs or ash slurry
5)Construction materials:Various mud sand slurry(such as Cement slurry) transportation.
6)Chemical: Phosphatic fertilizer or potassic fertilizer factory various
abrasive slurry trasportation.
7)Water conservancy:Lake,river dredge, sediment,grit, High plastic clay Suction line