Item No.: RS-TICC
China industrial water chiller for injection mold
machine/Environmental Friendly Chiller
Description of the water cooled central water chillers,
TICC-W series central water-cooled chillers adopt German made
BITZER with twin screw compressors, models with one or two
compressors, suitable for using R22.R407 and R134a refrigerants.
High efficiency condenser and evaporator have manufactured under
national "BR1” standard. Featuring stable heat exchange and ease of
maintenance, advanced controller with built-in microprocessor which
gives better performance than single chip based unit.
Features of the water cooled central water chillers,
With imported twin screw compressor, long service life to ensure
can make sure continuous operation.
Two energy saving modes are designed to meet customers
Evaporator and condenser built strictly according to national
Expendability of the controller makes upgrade of both hardware and
"Watchdog" technology make microprocessor able to automatically
diagnose and solve the problems.
512K memory for programs and 128K off-power data storage.
Touch screen panel.
System alarm text.
Able to monitor the setting of actual temp and display temp trend
in hours or in daily.
Remote control function turns on/off the machine according to
Support multi-language switch.
Working Principle of the water cooled central water chillers(one compressor)
Dimensions of the water cooled central water chillers,
Specification of the water-cooled central water chillers,
Foundation and Installation of the water cooled central water chillers,
Selection of Installation Environment,
1) Please select a firm and solid ground which can fully support
machine when running. The ground selection has also to avoid any
happens of vibration and loudly environment.
2) The machine should be installed on a place without any exposures
from wind, rain, sunlight, or any heat source occurrence.
3) Ambient temperature is from 0? to 40?.Relative Humidity (RH) is
4) The installation environment should be well ventilated and less
When install, please preserve a maintenance space, as shown blow.
For the cleaning of the condenser, please reserve space of 0.8L on
the left or right side of the machine.
1 )The foundation of the concrete base, according to the operation
weight of the machines, will put on steel bars, diameter above 9.5
mm, and are clustered together on the upper and lower layer of the
base, interspaced about 100mm.
5) When making concrete floor to be foundation. it is necessary to
rough the surface. Clean the floor before the installation.
6) The concrete base has to be rigid; the mixing proportion of
1:2:4.Put required anchor bolts into base, according to the
request. Polishing and flat the surface of the base when finished.
7) Put the machine on the base when it is fully dried out and
It has to be a well drainage works around the base to prevent water
Machine color--- blue or white, or others;
Machine brand--- factory brand, OEM brand or no brand;
We do OEM!
We do B2B, B2C!
For more choice, please click the following,
central water chiller/ open type water chiller/ Screw chiller/
water-cooled water chillers;
mold temperature controller/MTC;
Dryer,dehumidifier and loader 3-in-1;