1. Fast, highly accurate
2. Teach Pendant
Chevrons, fridge magnets, key chains, power supply, cell phone,
energy saving light, LED, DVD, DC, Switch, Connector, relay and
other industries needing fluid glue solder.
Applicable objects: Mobile phones, computer case, CD-ROM driver,
printer, ink folder, PCB board, LCD, LED, DVD, digital camera,
switches, connectors, relays, radiators, semiconductors, clocks,
toys and medical appparutus.
Silica gel, EMI conductive adhesive, UV glue, AB glue, glue, epoxy
adhesive, sealant, hot glue, grease,
glue, red glue, silver paste, thermal paste, solder paste,
1. Wide range of working envelopes
2. Excellent performance
3. Automatic suction effect, prevent leakage
4. Programmable interface via teach pendant
5. Samples processed for customer evaluation and approval prior to
|Work area (X/Y/Z)mm||200*200*50||300*300*100||400*400*100||500*500*150|
|Operation interface||LCD touch panel/Handhold control box|
|Drive mode||Micro stepping motor/belt|
|Power||AC220V 50-60HZ 0.8KW|
|Operation environment||Humidity:20-90% RH, Temperature:0-40°C|
|Date storage type||CF Card|
1, Keyboard control in Chinese and English version, easy operation
2, Major functions: Drawing point, line, surface ,arc,
circle,ellipse,irregular curve continuous complement and triaxial
3, Be able to set size of gluing area, speed of gluing, dispensing
time, stopping glue time. Stable glue exudation without glue
leaking and dripping.
4, According to the production process, work platform can be
installed with positioning PIN, glue guns, baseboard heating
temperature controlling device.
5, This machine can set up quickly and easy to operate, can save
more time and increase production.
6, The importing function supports AUTO CAD pattern, more accurate
7, Handheld LCD teach pendant,easy to program and control.
8, High degree of automation, easy operation which the staff can
master severl equipments, Reduce the labor intensity of works ,and
leads to increased efficiency and develop a competitive advantage
Auto Glue Dispenser/dispensing Machine supplier applicable objects:
Mobile phones, computer case, CD-ROM driver, printer, ink folder,
PCB board, LCD, LED, DVD, digital camera, switches, connectors,
relays, radiators, semiconductors, clocks, toys and so on
The automatic dispenser machine can satisfy various requirements
for dispensing, only need to choose different fixtures and math
with dispensing systems.
The following installation instruction is based on the 30CC needle
cylinder clamp and simple type dispensing system as a model.
1. The standard accessories include the 30CC needle cylinder
clamps, and they can be applied to 30CC or 55CC needle cylinder. If
you want to use other needle cylinder, then you have to purchase
other needle cylinder clamps appropriate.
2. Fix the needle cylinder clamps onto the Z axle. Put the hexagon
socket flat head screws through the holes of the clamps and then
lock on the Z ground side. The clamp has a couple of holes to
select, according to the specific requirements .
3. Connect the signal port(three holes) of the dispenser machine on
the backside to the signal port in the controller with dispenser
signal line. The signal port in the dispenser machine is the same
one that connecting with the foot-plate. Thus a problem may appear
that the port can not be shared, if your dispenser machine is not
purchased along with the matching machine. In such case, please
contact the Extruder supplier for joint exchanging.
4. Connect the compressed air source to the dispenser controller,
put the needle cylinder collet onto the needle cylinder and tighten
it, and put the needle cylinder into the needle cylinder clamps and
lock the screws which are used to fix the needle cylinder.( Please
don’t over tighten, in case of deformation. And once it deforms,
the piston then cannot fit with the inner side of the needle
cylinder, and cause air leakage.)
5. Connect the handheld programmer to the machine.
6. Connect the dispenser machine and the controller to 220V power
7. Do make sure the pressure pipe of the needle cylinder collet and
the power source will not influence the motion of each axles and
8. Congratulations for completing primary set of the dispenser
machine, please learn teaching mode operation according to the