36V, 110V, 220V
High Flow Victor Hydroponic And Garden Greenhouse Solenoid CO2
Regulator With Heater
1. Carbon Dioxide/CO2 is critical for all plants. Normal
atmospheric air around the world average about 380PPM(Parts per
million). When plants are provided higher levels of carbon dioxide,
they can grow faster and larger. It is usually agreed by experts
that 1500PPM is beneficial to plants.
2. Compressed CO2 comes in pressurized tanks or cylinders. The gas
pressure must be reduced and controlled in order to accurately
release CO2 into the grow area.
3. This CO2 regulator reduces the pressure of the CO2 exiting the
tank, controls the flow of CO2 with a solenoid valve and regulates
the amount of the CO2 being released with precision flow-gauge.
4. This CO2 regulator assembly comes complete with all of the
required devices to make using compressed CO2 easy
5. Regulator connects directly to either 20lb or 50lb CO2 tanks.
6. The 110-240 volt solenoid valve is pre-wired with a 6ft power
cord connect to controllers or timers.
7. The precision flow-gauge can release between 1/2 and 15 SCFH of
CO2 per hour(Standard Cubic feet per hour)
8. Increases the plants metabolic rate; Speeding up growth rates
and yield by up to 40%
9. This CO2 Regulator and valve assembly helps you maintain CO2
levels in your grow room or greenhouse for increased yields.
10. This quality carbon dioxide emitter combines a precision
regulator, flow gauge and industrial grade solenoid valve that
gives you even CO2 dispersion throughout your growing area when
connected with an oscillating fan (fan not included)
11. The adjustable CO2 flow meter can be set from 0.5 to 15 SCFH
(cubic per hour)
12. This unite is designed to work with any 120-240 volt control
13. Includes a 6 feet power cable and 10 feet of 1/4” air line.
1. Forged brass body for maximum strength.
2. Easy to read dual scale gauges with screw-on polycarbonate lens
3. Flow meter with easy to read tube and virtually unbreakable
4. Precision engineered pressure compensated design flow meter for
5. Polycarbonate flow tube and outer cover are impact resistant for
6. Please inform inlet and outlet thread when ordering.
For automatic welding, industries, casting, neutralization of waste
water and ect in hydroponics, Indoor garden, Horticulture…
Use this regulator only with non-siphoned standard CO2 cylinder.
0.5-15CFH flow meter