15KW Submersible Sewage Pump, civil water plant submersible pump,
About WQ pump
WQ series submersible sewage pump is mainly used for municipal
works, industrial buildings, hotels, hospitals, people's air
defense, mines etc. Trades to drain off the sewage, waste water,
rainwater and living water in cities containing solid grains and
various long fabrics.
As its good performance and high quality, WQ series diving sewage
pump is widely used.
1. the temperature of medium should not exceed 40℃.and the density
can’t be larger than 1200Kg/m3 with PH value between 5 and 9.
2. specified voltage: 380V,specified frequency:50Hz. Motor shall be
operated under the circumstance of specified voltage and specified
3. the largest diameter of solid passing through pumps shall not
exceed the half diameter of pump exit.
N.W. of pump
|Model||Discharge bore||Flow rate ()||Head||Rotary speed||Motor power||Efficiency|
- Adopt CFD technology and being more efficient.
- Use unique mechanical seal pattern and bearing structure for more
- Being compact structure with small volume and light weight, and
easier for daily maintenance.
- Submersible running with low noise.
Structure and materials of pump
Bearing: ball bearings with a reasonable configuration, extending the
duration of the pump.
Cooling: cooling system for 11KW motor or larger motor can ensure the pump
normally work whether the motor is on or under the liquid surface.
A part of the liquid is extracted to bring out the beat produced by
the motor from the pump circulation to the cooling barrel and to
the pump casing and, when external cooling is required, the cooling
sleeve may be separated from the pump casing and individually
connected to the cooling system.
Motor: Of F class insulation, max. working temperatures 155 ℃, and of a
protective grade IPX8 with the effective seal.
Mechanical seal: Use Bogman mechanic al seal of Germany, two ways of the seal are
in series with each other and individually work to separate the
motor from the pump seal to provide the motor with a dual
protection. The sealing material on the pump side is tungsten
carbide, while on the motor side, graphite/silicon carbide.
Oil chamber: Oil can lubricate and cool the mechanical seal and realize the
attached function of safety by preventing liquid from penetrating
into the motor. The air of a certain amount left inside of the
chamber can lower the pressure accumulatively raised.
Impeller: With the optimized design, the impeller wil not be blocked up when
to transport liquid with its optimum flow and rate and the maximum
efficiency. There are suitable impellers at choice for every point
of working condition.
Pump case: use the know-how of CAD/CAM for achieving higher efficiency.
Shaft: The pump is coaxial with the motor and the sealing device on the
end of the shaft avoids contact with the medium so as to protect it
from corrosion. The as short as possible designed stretched
rotating ensures no deflection and low vibration, extend the
duration of both mechanical seal and bearing and lower the noise at