Low Toxicity Solo Fm-200 Fire Suppression Systems With 180L Storage
|6||Max working pressure||4.2Mpa|
Fm200(htc-227ea) is a kind of colorless and tasteless and
non-corrosive and electricity-insulating gas without residue and
pollution after extinguishing. And ODP of it is zero. It is a
friendly-environment gas to be used for extinguishing. Also,
because of such feature, it can be used in special place where
electrical fire is easy to happen.
The place where the fire is easy to happen, like paint-spraying
production line, aging-electrical equipment, rolling machine,
printing machine,h, oil immersed transformer, melt impregnating
tank, tank, large generators, drying equipment, cement production
process of pulverized coal, and the ship's engine room, cargo hold,
FM200 fire suppression is suitable for occupied room, because of
its working principle is whole flooding. Those places that easily
get fire require our fire suppression system. Taking the followings
Telecommunication rooms, data and paper archives, switch gear
rooms, computer rooms, military applications and cell sites,
high-tech medical, robotic equipment, telecommunication centers,
textile manufacturing, records and data archives, electric utility
facilities, testing/imaging equipment, media storage, chemical
laboratories, military vehicles.
1/ Swift response. Since there is no long distance transportation
of pipes, so fm200 gas can be directly discharged into protection
zone. Meanwhile, its spraying time is less than 8 second. So it
will save more time relatively when the fire happens.
2/ Convenient installation. Compared with pipe network system,
cabinet system would be relatively simple to conduct installation.
After installation of control panels and electric components, left
work is just to connect it with one cabinet fire extinguishing
device or devices. But one room should not be matched with more
than 4 pieces of it because of the limitation of the output current
of a control panel.
3/ Lower cost. Obviously, the price would be cheaper than pipe
network type for the protection zone which just needs one single
cylinder, because there is no need to consider about the expense of
pipes and pipe fittings, also the cost of manpower for this part.
Here is the illustration of working principle to whole system,
Actually, a complete one set system contains two parts: the
extinguishing device(the whole composition is like the photo
beside) and electrical elements.
One set cabinet type fm200 fire suppression device is formed by the
following components: fm200 agents, a fm200 cylinder, a hoop, a
cabinet, a container valve, a solenoid actuator, a flexible
hose(high pressure hose), nozzle(s) and pressure switch.