Crazy Fun Airtight 0.8mm PVC / TPU Blow Up Water Rolling Toy For
|Material||0.8 mm PVC|
|Dimmension||4m x 2.4m|
|Color||Blue , Red ,Yellow , Transparent and Other colors can be customized|
|Dlivery time||7-10 days|
1.Material: This Items we use 0.8mm PVC material, you also can
choose TPU. For this Itmes, We have two kinds of material, PVC or
TPU, TPU is much expensive than PVC. Compare to PVC , TUP Material
is with advantage features as: Friendly environment, more
elasticity and low-temperature-resistant. If you need, we can use
TPU material as you want.
2. High precision stitching machine and cultivated stitching
All of our water rollers are stitched by high precision stitching
machine. most importantly, we always apply double stitching
anywhere in the inflatables and quadruple stitching in positions
sustaining much force and pressure from jumping.
3.Water roller is a giant 4m long plastic cylinder, with which you
can rock-and-cross the river safely. The inset cups on the outer
surface help grip and paddle your way through the water as you spin
the cylinder. With a internal chamber, you can engage in Nuclear
Face-Off as you and your friend compete to bump and bounce each
other into submission.
4.Water rolloer is a double-sectioned sphere, with one roller
inside and the other with an air layer between. Usually used on
pool or river. Water Roller are lightweight and made of flexible
PVC or TPU. A typical Water rolloer size is about 2.8M X 2.4M for
Adult and 2.4m x 2.2m for Kids. The inner and outer water roller
are connected by numerous (often hundreds) small ropes. Water
roller have one or two tunnel-like entrances.Entrances Diameter is
4.Feature:Waterproof, anti-tearing , Fir-resistent , strong and
5.Payment terms:50% deposit before producing, and 50% balance
1. Reliable and durable Material
Top quality material are always applied on our inflatables, and all
of them are from one of the best material suppliers in China -
Plato chemical; All of the materials we are applying meet ROHS ,
EN14960 , CE , UL.
2.Not only do we focus on our products quality themselves, but also
we pay attention to other details like packing. Based on our years
experience, we always provide our customers the best packing like:
Use heavy-duty 0.65mm PVC Tarpaulin carry bag to pack Inflatables
and Exported standard cartons for Air pump and repair kit.
3.we have stricly quality control procedure and good after-service,
the details are as follows:
a.We test each product for 3 days to ensure the toys seamed exactly
b.We provide repair kit for free,which including material and glue
for repairing in case.
c.We will guide you to repair the roller and make compensation for
d.7 x 24 hours online service , any questions will be promot
3. Our harness inside the roller is very flexible and you can
adjust it to proper position quickly.
4. Imported miller welding machine which has stable welding
temperature, so our products will not be overwelded or misswelded
to ensure the products stable and durable.
1. Find out exactly where the leak is. Fill a spray bottle with a
mixture of soap and water and spray it liberally on the water
roller along the seams. You will notice that the solution starts to
bubble up where the leak is located, so take note of the position
of the hole.
2. Prepare the hole for patching. Dry the seam off, and make sure
that it is completely deflated before attempting to patch the seam.
If you have the patch kit that came with the roller, you can use
the prep solution to thoroughly clean the rubber before proceeding.
Rubbing alcohol also works.
3. Apply glue to the seam and let it dry for about 15minutes. If
possible, apply some glue to the inside of the seam as well, so
that it spreads out and gives an extra layer of protection when the
water roller pressurizes.
4. Fill the water roller about halfway with air and wait another 30
minutes or so to make sure that the glue has dried completely.
5. Inflate the item completely and spray it again with the soap and
water mixture to make sure that the hole is indeed fixed.
Pictures As Shows: