3D printer release film ,UV resistance film ,SLA and DLP type printer

Our 3D printer membrane is our newest products for 3D printer releasing specially .It is used for 3D printers which (UV curing,SLA and DLP type).It is placed in a tray for the glue to release, instead of silicone film

Main features:

1. high transmittance, UV light through rate of 92%, the curing time is shorter, better curing effect, higher precision printing;

2. More durable, release more than thirty times the number (refer to the printed page);

3. For many types of UV light curing 3D printer, A money directly to the protective film is peeled off the film, and then the release layer attached to the plastic tank, instead of using a silicone membrane, more convenient to use than the silicone membrane, frequency of use over silicone film, using a method similar to mobile phone film. B section without adhesive, glue around the bottom of the tank needs to have fixtures.

Size: 210 * 290 mm, and about the same size A4 paper, special sizes (20 or more) contact the owner customization.

Thickness: A section 0.125 mm; B, paragraph 0.1 mm.

Note: A paragraph has positive and negative film, after which goes without adhesive protective film, the protective film is peeled off the adhesive tape stuck on that side glue tank; B section is no positive and negative, can be used on both sides.

(Product development phase is currently in trial, is currently testing a small scale trial, so a limited number of sales.)

Everyday new companies open, and companies die.

Most died companies was caused by the founders,including his bad management,his short dream and his attitude to the customers.

Mianyang Prochema Commercial Co.,Ltd. is not an old company,but will be a 100-year company,because his founder has that dream.

Founder himself can not live 100 years,but his spirit and attitude will.

Honest and responsible and insistant are the key points for a company to be existed long enough.

In China,real 100-year company is rare.Hope Mianyang Prochema will the one.

History:

2004--Mianyang Prochema established,initially in insulation and printing plastic film 

2007--Set up Gus Industry(hongkong)co.,limited for global business management

2008--Set up Shenzhen factory to produce the films and involved in conductive film and interactive touch screen

2010--Deeply involved in in-door advertising which is produced from the conductive film

2013--World wide promoting privacy PDLC switchable film and glass

Products and service catalogue:

1.Conductive film

  ITO transparent conductive film

  Copper grid transparent conductive film

  Metal sputtered polycarbonate film

  Touch screen and touch sensors

2.PDLC switchable film and glass,and car solar film

3.Printing film

  Texutred hardcoated PET film

  Printing grade Polycarbonate film

4.Insulation film

  UL V0 polycarbonate film

  UL V0 Polyester film

  General electrical insulation PET film

  Fluoro products and parts

  ETFE film and PVF film

  Perfluorinated ion exchange film

  PVDF PIEZO film and sensors

  Battery barrier film

5.Rugged TFT LCD display module and mainboard,military touch panel with EMI shielding

Professional services need the service providers to be professional. Different from many other companies