96-09 Suzuki Sidekick Aerio SX4 Tracker 2.0L 2.3L 1.8L Oil Pump
J18A J20A J23A #16100-65D00
99 - 02 SUZUKI ESTEEM GL & GLX 1.8L DOHC L4 16V, VIN CODE
96 - 98 SUZUKI SIDEKICK SPORT 1.8L DOHC L4 16V, VIN CODE "G18K,
99 - 03 CHEVROLET TRACKER 2.0L DOHC L4 16V, VIN CODE "J20A"
02 - 03 SUZUKI AERIO 2.0L DOHC L4 16V, VIN CODE "J20A"
07 - 09 SUZUKI SX4 2.0L DOHC L4 16V, VIN CODE "J20B"
99 - 03 SUZUKI VITARA 2.0L DOHC L4 16V, VIN CODE "J20A"
04 - 07 SUZUKI AERIO 2.3L DOHC L4 16V, VIN CODE "G23, J23A"
What is an Oil Pump
The oil pump is a critical component of the internal combustion
engine. The oil pump circulates the motor oil to the bearings, pistons,
and camshaft of the engine. The pump forces the oil out under
high-pressure and lubricates the bearings while it assists in
cooling the engine. The oil helps lubricate the parts so they will
turn smoothly with little resistance or friction between them. It
not only makes the machine run smoother, but extends the life of
the machine's parts.
Oil pumps come in a variety of types. The most commonly used pumps
are gear-wheel pumps, vane pumps, trochoid pumps, and plunger
pumps. All these pumps are designed to supply more oil than what is
normally required for lubrication. It has a spring-loaded pressure
relief valve to limit the oil pressure. The spring holds the
pressure relief valve closed during normal oil pressure conditions
and releases it during high oil pressure conditions. If your car's
oil pump is not functioning properly like overheating, noisy and
knocking, you must replace it at as quickly as possible.
Oil Pump critical quality
Near the bottom of the engine is the oil pan which stores the oil
for the oil pump to draw from. The oil pump is mounted inside the
oil pan and connected to the engine to ensure they turn together.
Since the oil is pumped under pressure, a sensor is used to monitor
how much pressure the oil is under. If the oil pump fails, serious
mechanical breakdown will quickly follow. The job of the oil pump
is to force oil up out of the sump into the lubrication system at a
pressure sufficient to reach all the bearings and contact points.
Maojia Industry’s premium Oil Pumps are manufactured from the
highest quality aluminium and cast steel, covering the most popular
applications in the aftermarket. Maojia Industry’s oil pumps are
designed to meet OE standard with the correct flow and maximum
pressure control for each application. All the Oil Pumps are packed
from our warehouse with relevant components where applicable. All
associated parts are individually sealed, providing extra
protection to the product.
Maojia Industy’s oil pumps advantages
1. Years of OEM experience in China and overseas.
2. High quality aluminum and superior cast steel.
3. Experienced engineers and technical team.
4. Advanced manufacturing equipment, R&D software and test
5. 100% tested for volume and pressure before shipment
6. Wide range covers the most popular applications