WDW-5S Professional Supplier 5KN 500KG 0.5T Tensile Testing Machine
, Tensile Strength Testing Equipment Best Quality
It is applicable for wide range of material for tension,
compression, bending, shearing and low cycle test. Suitable for
metal, rubber, plastic, spring, textile, and components testing. It
is widely used in the corresponding industries, research and
development, test institutes and training centers etc.
ASTM, ISO, DIN, GB and other international standards.
3.Main Technical Parameters:
4. Main Unit Feature:
4.1 Adopt single column structure, lower for tensile, upper for
compression, double space. The beam is step less lifting, light but
4.2 Adopting ball screw drive, realize no clearance
transmission,make sure the precision control of the test force and
4.3 The photoelectric encoder is the displacement sensor, with high
resolution, strong anti-interference ability.
4.4 The shield plate with limit mechanism used to control the beam
moving range, in order to avoid sensor damaged due to the moving
distance is too large.
4.5 The table, moving beams is made of high quality precision
machining steel plate , not only reduce the vibration generated by
specimen fracture, but also improve the stiffness.
4.6 The motor tail is upwards, above the work surface, this design
makes the main unit lower space narrowing, the whole machine is
more coordinating, and more easy to spread out the heat generated
by the motor rotation, extend electrical components life.
4.7 Three columns of mandatory orientation, make the main unit
rigidity much improved, to further ensure the repeatability of
4.8 Adopt bolt type grip installation, make the grip replace
5. Function Feature:
5.1 Automatic calibration: system can automatically realize the
accuracy of the calibration value.
5.2 After the sample broken, automatic stop.
5.3 Automatic display: During the whole testing process, the LCD
real-time display the testing force,peak value, displacement,
testing speed and testing force-time curve,testing
5.4 Automatic return: beam automatic return to initial position
when testing finished.
5.5 Breakage judgment: sample after fracture,beam automatic stop
5.6 Limiting protection: Program control and Mechanical limiting
5.7 Overload protection: When more than 3 to 5% of the rated load
device automatically stop working.
5.8 Automatic calculation: automatic calculation area after input
sample diameter (round)Width, thickness(flat), sample gauge ect.