High CRI Bi Color LED Photography Lights For Indoor / Outdoor
|Accessories Name and Model No.||Quantity|
|4400mAh Lithium battery||2|
|Battery charger and adapter||1|
|AC adapter and power cord||1|
|Ball head CA109A||1|
▪ LED508AS is composed of 204 pcs of white and 204 pcs of warm
LEDs. LED's lifetime reach 50000 hrs.
▪ Delicated design,compact,light-weight and convenient to carry.
▪ It is heat free and remains consistent even as the battery
voltage does down.It produces soft,bright light ray with standard
color temperature daylight or tungsten.
▪ Dimmable from10% to 100%,flicker-free.
▪ It is suitable for indoor and outdoor photography and
videography,portrait photography and wedding photography,especially
good for children photography.
▪ LED508AS is absolutely flicker-free and optionally adjustable
from 3200K all the way to 5600K.It can definitely satisfy users'
demand for color temperature.
▪ Runs on AC adapter or battery.
|LED quantity||508 PCS|
|Continuous working time||Approx 2hrs|
|Battery type||Rechargeble Lithium battery, 4400mAh, 7.4V|
|Battery life time||Charge and Discharge for approx. 500 times|
1. Install the battery onto the light.Connect the light to camera
by the hot shoe.Turn on the power switch and the light works.
2. There is a power indicator light on the back of the light.Turn
off the light and press the power test button to check the battery
3. The battery level shows as below:
4. Please adjust the brightness of LED508A.Please adjust both the
brightness and color temperature of LED 508A accordingly.
5. The four columns in the front of the light are for attaching a
diffuser.You can attach a diffuser and adjust the pillar height to
get different soft lighting effect .
6. When the battery runs out,press the installation and
uninatallation button to take off the battery.It takes 4-5hrs to
1. It is no need to replace the LED bulbs in normal use.Please do
not disassemble the light or solder the LED bulbs by the
2. Please do take off the batteries when in storage.
3. Please do not block the louvers,or it may seriously influence
LEDs' effect and lifetime.
4. The charger adapter is used for battery charging only.Please do
not use on the light directly.
5. Please do discharge and recharge the battery at least once for
every month if it is not in use.
6. It is not allowed to drop or impact the light to avoid fire.
7. It is not allowed to short circuit the battery,or it may
seriously damage the battery or cause a
8. It is not allowed to throw the battery into fire.
The LED light is guaranteed for 12 months.
The battery is guaranteed to be charged and discharged for 500 times.