High And Low Temperature Thermal Shock Vacuum Chamber Programmable
HD-E703-100 Three Zone Thermal Shock Test Chamber....
High And Low Temperature Thermal Shock Chamber is the perfect testing machine of electronic components, metal,
chemical materials, automation components, communication module,
national defense industry, aerospace industry, BGA, PCB substrate,
electronic chip IC, semiconductor ceramic and high polymer
Meet the standard:
GB/T2423.1 test method at low temperature;GB/T2423.2 high
temperature test method;
GB/T2423.22 temperature test;GJB150.5 temperature impact test;
GJB360.7-87 temperature impact test;GJB367.2-87, 405 temperature
SJ/y73 T10187-91 series temperature test chamber SJ/y73 T10186-91
series temperature test chamber
IEC68-2-14 _ test method of GB/T2424.13 N_ temperature changes -
2002 test method for temperature change test guideline
GB/T2423.22-2002 temperature weathering test QC/T17-92 auto parts
EIA364-32 thermal shock test program (temperature cycle) electric
connector and socket of the environmental impact assessment
1. Short temperature recovery time
The maximum temperature recovery time at upstream air for 2 zone
test (+150°C and -65°C) and 3 zone test is only 5 min.
(10 min. for TSA-201S and TSA-301L)
2. Great uniformity
Horizontal air flow system offers excellent specimen temperature
3. Efficiency thanks to specimen temperature control (option)
Thanks to this feature, the equipment achieves set temperature
attainment with rapidity and accuracy.
4. STT function (option)
Thanks to the specimen temperature monitor with trigger, exposure
time starts only when the specimen has reached the
set temperature, leading to more precise test results.
5. User-friendly controller
The LCD touch-screen controller allows easy check of the test
patterns, temperatures settings, test cycles and graph displays.
6. Reduced load current
7. Reduced operating noise
High temperature chamber:RT~+150°C Low temperature:RT~-60°C
Less than ±2°C
Temperature Conversion Time
Less than 10S
Temperature Recovery Time
Less than 5min
External material: SUS#304 Stainless steel plate
Internal material:SUS#304Stainless steel plate
Water-cooled or air-cooled,
Tecumseh compressor in France,
environment friendly refrigerant
Programmable temperature controllor imported from Japan
PT 100 *3
TEMPERATURE : -100.00+200.00°C
/ TIME : OH1M ~ 9999H 59M
/ CYCLE ~ 10000 CYCLE
TEMPERATURE : 0.01°C / TIME : 1 MIN
PID + PWM + SSR CONTROL METHOD
Simulated Load IC (KG)
Cable hole, lighting equipment
AC380V/50HZ Three-phase four-wire ac power
The outlet and return it checks for taste known control
/CM BUS (RS-485) remote monitoring management system
/Ln2 liquid nitrogen rapid cooling control device
It can be customiazed according to customer demands.
Technology index refer to product description.Delivery time within
1. If the high-temp exposure range lower limit + 60°C is required
or the low temp exposure range lower limit -60°C, please select the
“ambient-temperature exposure” option
2. If the temp fluctuation need to below ±1.8°C please select the
“Low temp fluctuation package”
3. Temperature heat-up/pull down time are applicable only during
independent chamber operation
4. If the automatically operated sliding door required, please
select the “Automatically door package”
5. Air-cooled condenser / Water-cooled condenser both available
6. Apply on water-cooled condenser only
Thermal Shock Chambers composed of
1, thermal shock chambers structural forms: thermal shock chambers chamber using integrated forms of composite
structure, both located in the upper chamber by a high-temperature
tank, located in the lower portion of the cryogenic tank, located
in the rear of the cabinet and the refrigeration unit is located
after the left side of the electrical control panel composed of
2, thermal shock chambers outer box material: high-quality cold-rolled steel sheet, the surface for
3, thermal shock chambers inside walls Material: SUS304 stainless steel, corrosion-resistant, easy to clean, nice.
4, insulation materials: high-quality ultra-fine glass fiber cotton, imported nonflammable
5, sample holder: static stainless steel sample holder.
6, window: On the box (hot box) opened the door to a 350 × 250mm electric
moisture barrier coating temperature observation window.
7, cable threading hole: diameter 50MM cable conduit opening in the middle of the test
sample holder box.
8, sample holder bearing: ≥50Kg.
- Hot chamber overheat protection switch
- Cold chamber overheat protection switch
- Air circulator overload alarm
- Refrigerator high/low pressure protector
- Compressor temperature switch
- Air pressure switch
- Water suspension relay ( water-cooled specification only)
- Compressor circuit breaker
- Heater circuit breaker
- Test area overheat/overcool protector
- Air purge valve
(The test chamber)
Why choose us?
1. Considerate Service Different countries plugs, manually change
the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service:
18 months warranty. Besides, we can help you to repair your problem
controller freely, even it's not from our factory. What you need to do is to send us the
We will sign a letter of commitment while we sign the contract,
which will improve your confidence to us.
Simulation Animatronic Customer Triceratops are covered with air
bubble film before put them into the wooden case, which not only has good shock
absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless,
moisture corrosion, good transparency etc.
How to Contact Us?
Please Send your inquiry Details in the below for our
quotation,Click "Send" Now!