Home > Other Surveillance Products >

HD SDI Digital CCTV Tester 7Inch For POE Power Supply Testing

Categories CCTV Tester
Place of Origin: CN
Brand Name: Chinasky
Model Number: SDIT3600
MOQ: 1pc
Packaging Details: Paper Box
Delivery Time: 12days
Payment Terms: T/T, Western Union
  • Product Details
  • Company Profile

HD SDI Digital CCTV Tester 7Inch For POE Power Supply Testing

HD SDI Digital CCTV Tester 7Inch For POE Power Supply Testing

Quick Details:

  • 7inch HD LCD screen display , 800(RGB)x600
  • HD SDI digital camera image display and output
  • VGA, HDMI signal input display, convenient to DVR / NVR setting
  • DC12V 2A power output for camera
  • USB 5V 2A power out for phone
  • PTZ address scan, search up the ID of PTZ camera.


The CCTV Tester with 7-inch HD display,It is developed for the On-Site installation and maintenance of IP camera,analog camera and network device, with Video display for analog camera ,PTZ control, DC12V /2Aoutput power ,Audio test, Color generator, RS 485 Data searching and Cable testing, which are the same to the previous models. The new developed functions include POE power supply testing, PING testing, IP address scan, Video screen shot , Video record, Image magnification , Port flicker, Cable search , LED lamp etc.


—Find out the other end of the cable in security maintenance and network engineering

—CCTV system installation and maintenance

—Dome camera and All in one camera testing
—The CCTV transmitting channel testing
—PTZ controller


  • 7inch HD LCD screen display , 800(RGB)x600
  • HD SDI digital camera image display and output
  • VGA, HDMI signal input display, convenient to DVR / NVR setting
  • DC12V 2A power output for camera
  • USB 5V 2A power out for phone
  • LED Lamp,easy to operate at night
  • Micro SD card moveable
  • User-defined shortcut keys(F1 and F2)
  • LCD screen brightness/contrast/color Saturation adjustable
  • Automatically adapts and displays the video format of NTSC/PAL
  • Optical Power Meter, it can measure the optical power value* (optional function)
  • Digital multimeter, It is used for the voltage current, Resistance, Diode, Capacitance measurement, *.
  • 10xzoom,video image can be magnified to view the details, easy to use
  • Video record and playback ,Snapshot and save the current image as JPG file in the SD card
  • PING testing,test IP camera or other network devices’ ethernet port whether work normally, and the IP address whether right
  • PEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement *.
  • Cable scan, Send the specific signal, easy to find the connected cable.*
  • IP address scan, quickly search the IP address for the connected IP camera and other network devices
  • POE voltage measurement,test the PoE switch’s voltage to IP cameras, wireless AP device and other PD devices
  • Device Port flicker,easy to find the connected PoE switch port by sending special signals, the connected PoE port will flicker at special frequency.
  • Link monitor; check the setting IP address whether occupied.
  • TDR cable tester ( BNC cable, network cable etc) * (Optional)
  • PTZ address scan, search up the ID of PTZ camera.
  • Network cable and Telephone cable testing, display the sequence of connection and the NO

of the LAN cable

  • Support RS232/RS485/RS422,Rate 600 ~ 115200bps adjustable
  • Multi-protocol. Supports more than thirty PTZ protocols. Such as PELCO-P, PELCO-D,


  • PTZ protocol analysis, control protocol command displays to check RS485 transmission

whether is normal, easy to find the fault device

  • PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and

sets and the preset position

  • Audio input test, test the audio signal from pickup devices
  • Visual fault locator , to test fiber’s bending and breakage * (optional function)
  • Lithium Ion Polymer Battery .The device employs advanced power control and protection circuit. The device is high power-efficient, energy saving and environmental protection. It can last 17 hours for normal use after charging for 7 -8 hours

Note: With "* " sign means function optional

2.3 Function

2.3.1 Video signal testing

IP camera tester ,built-in 7 inch HD LCD screen display , resolution 800(RGB)x600

Full-view display screen, easy and directly displays the camera image quality

Support PAL/NTSC LCD screen brightness/Contrast/Color Saturation adjustable. It is suitable for field construction and maintenance working.

2.3.2 HD SDI camera image display and output (*optional)

7 inch LCD 800*600 HD image display ,clearly display HD SDI HD camera, support 1080P HD camera(25frames,30 frames),720P(50 frames),with Larger-screen image display, and easy to install camera.

2.3.3 VGA,HDMI input

VGA and HDMI signal input, as a monitor and television, to receive DVR/NVR output signal, help engineer debug and set DVR./NVR.

2.3.4 Video signal level test

Test video signal strength attenuation, longer video signal cable will cause the image to be dim, and reduce the image dynamic range, video signal is too strong, it will cause the virtual shadow, and reduce the sharpness of the image.

It also can real-display the video level value, if out of range, notices will be display in the screen.

2.3.5 PTZ controller

Display the input video images. Pan/tilt the P/T unit and zoom in/ out the image. Setup the controlling parameters like protocol, communication port, baud rate, PTZ ID, pan/tilt speed; set and call preset position.

2.3.6 Enhanced Color bar generator

Video Generating, the PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight-system colorful imagines). By receiving the video color bar to test the video channel whether transmit normally. And judge whether the color is different, because of the transmission loss or interference, it suitable for Video transmission of the field tests, such as optical video transmitter and receiver, video cable etc.

The new function color bar can test the image whether shift.

The color bar (red, green, blue, white, black) test the monitor whether have white or black dot etc.

2.3.7 DC12V 2A output power

Power the camera with DC12V (2A) power output from the tester. It is helpful for demo and testing when the power supply is not available.

2.3.8 Audio testing

Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.

2.3.9 Cable tester

Test LAN cable or telephone cable.

Connect LAN cable or telephone cable with the CCTV tester and cable tester. And then the connecting status, cable type and the sequence of wires will be displayed, as well as the serial number of the cable tester kit.

2.3.10 PTZ controller

Search the Control protocol code from Multifunction keyboard or DVR by RS485 /RS232 interface, test the PTZ control command data whether received anomaly and RS485/RS232 data transmission.

Screen displays 16 hexadecimal codes such as

PELCO-P:A0 00(Add) xx xxxxxx AF xx

PELCO-D:FF 01(Add)xx xxxxxxxx

2.3.11 PTZ address scanning

Search up the ID of PTZ camera. Help the engineer search the speed dome address quickly.

2.3.12 Image magnification(10xZoom)

Set image 10x zoom, can view and display the details by 1x,2x,3x,4x,5x,6x - 10X zoom in the monitor and tester.

2.3.13 Video snapshot

Capture the video image and save the current video frames as JPEG file

2.3.14 Video record

Record and save the current video in the SD card

2.3.15 Video playback

Video image and record files are saved in the SD card. Storage file directory can be created according to the date

2.3.16 Cable scan (optional function refer to the last page)

Send the specific signal, easy to find the connected cable.

2.3.17 Port flicker

The tester will send special signals to make the connected POE port flicker at special frequency, which will enable the installers to easily and quickly find the connected ethernet cable. This function can prevent mistakenly insertion or disconnection non-corresponding cable to artificially interrupt network connection.

2.3.18 IP address scan

In digital IP surveillance applications, if IP camera’s IP address is not clear or forgotten; the device cannot be used .IP address scan can quickly search the connected IP camera or other network device’s IP address.

2.3.19 Link monitor

To add an IP camera or other network device to the current network group, the new IP address must not be occupied, otherwise it will cause IP conflicts and stop the equipment normal working. Link monitor can check if the new setting IP address is occupied.

2.3.20 PING test

PING is the most conventional network debugging tools; It is used for testing if the connected IP camera or other network equipment’s ethernet port is working normally and the IP address is correct.

2.3.21 POE tester

It can test the PoE voltage when the POE switch is supplying the POE power to IP camera. It can clearly display the power+ and power- on the ethernet cable pins, each cable pin’s voltage and the failure connection of cable pin series numbers.

2.3.22 Digital multimeter (optional function refer to the last page)

CCTV Tester built in highly stable and reliable 33/4 digit (6600) digital multimeter. It is used for the DC and AC voltage measurement , AC and DC current measurement , Resistance measurement, Continuity test, Diode measurements, Capacitance measurement, Auto/Manual measuring range switching, relative value measurement and locking . It is easy operation and professionally accurate.

2.3.23 Visual fault locator (optional function refer to the last page)

Visual Fault Locator with 650nm wavelength can emit red laser sources to test multi-mode and single mode fiber’s bending and breakage, and Continuous light-emitting and 1HZ, 2Hz modulating light output. It is indispensable tool in fiber project constructing, fiber net-work maintaining, optical component manufacture and research.

2.3.24 Optical Power Meter (optional function refer to the last page)

The New tester adopts the most advanced handheld instrument specific integrated chip , achieve ultra-low power operation, with the 7 inch LCD High-definition screen display ,five wavelength calibration points 1625nm,1550nm , 1490nm , 1310nm , 1300nm , 850nm.Linear or nonlinear optical power display, it can measure the optical power value, and also be used for Relative measurement of optical fiber link loss. It is necessary tool for fibre-optic communication, cable television system and security system maintenance.

2.3.25 LED lamp

It is useful for the Engineer to install and maintain security system at night. LED On/Off pressing button, easy operation.

2.3.26 F1,F2 User-defined shortcut keys

The user-defined shortcut key is designed for improving the efficiency for the engineer, anytime press, easy to operate.

2.3.27 Video level meter (optional)*

PEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement

Use hardware high-frequency sampling and processing technology, test the Peak video signal, SYNC signal level, COLOR BURST chroma level more accurate.

PEAK video signal level: Measuring peak video signal, the video signal level is 1000±175mV in PAL format (NTSC format :140±15IRE ), the level is too low will cause the image to dim, reducing dynamic range; Level is too high will lead to virtual shadow, reducing the definition of the image

The SYNC signal level: measuring the amplitude of the video sync pulse, for determining the video level is correct and that the coaxial cable connectivity. Sync level range is 300 ± 35mV in PAL format(NTSC format: 40 ± 5IRE ), the level is too low will cause the image to fracture or scroll; Level is too high will reduce the image color levels and dynamic range.

COLOR BURST chroma level: Measuring camera color burst level, to determine whether the coaxial cable transmission for the best detail and color. Chroma standard level is 280mV in PAL format and is 40 IRE in NTSC format. Chroma level is low,Chroma level is low, the color will become dark, color level is too low, the details of monitor reception image will be lost and even become black and white;

chroma level is too high, the image will be displayed spot , affect the image detail and clarity.

Coaxial cable is too long will reduce the chroma level.

2.3.28 TDR break-point and short-circuit measurement

New function: TDR cable testing, accurately measure BNC cable, network cable, control cable break-point (cable length) and short-circuits location. It improves working efficiency.

2.3.29 USB 5V 2A power out (power bank)

Standard USB output interface, applies to most USB data cable, current 2 A output, Can charge for mobile phones and other digital devices anytime or standby power .

Technical specifications:

SDI digital Video Signal
Video IN/OUT1 channel SDI IN BNC & 1 channel Output
HDMI digital Video Signal *(optional)
digital Signal in1 channel HDMI in put,support 1080P,720P
Video Test
Signal modeNTSC/PAL (Auto adapt)
Video Output Mode1.0 Vp-p
Display7inch TFT-LCD, 800(RGB)×600 resolution
LCD adjustmentBrightness, Contrast, Saturation adjustable
Video IN/OUT1 channel BNC Input & 1 channel Output
VGA input display
VGA input displayReceive DVR,NVR VGA signal
Video Level test
Level testVideo signals measured in IRE or mV
Video Level meter (optional)*
Video Level meterPEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement
DC12V 2A power output
DC12V power outputOutput DC12V/2A power for camera
5V power output
Power outputOutput 5V power for phone as power bank
Audio input test
Audio input testtest the pickup and other audio equipments on the front-end
PTZ controller
CommunicationSupport RS232 and RS485
PTZ ProtocolCompatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
Baud Rate600,1200,2400,4800,9600,19200,57600,115200bps
Video Signal Generation
Color bar generatorOutput one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color )
UTP Cable tester
UTP cable testTest UTP cable connection status and display in the screen. Read the number of the test box.
RS485 /232data analysis
Data MonitorCaptures and analyzes the command data from controlling device
10x Zoom Image
Image 10x zoom10x zoom image display and video out
Photograph,Video record, Record playback
Photographsnapshot and save the current image as JPG file
Video recordVideo record and storage the file
Record playbackTo view the storage file in the SD card
Port flicker
Port flickerFind the connected POE port quickly.
IP scan,Link monitor,PING test
IP scanFind out the connected IP camera or the other network equipment IP address quickly.
Link monitorCheck the IP address whether is occupied
PING testingTest IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address
Cable scan *(Optional)
Cable scanSearch the cable by the audio signal
PoE test
PoE testDisplay the power supply voltage and cable connection states
Digital Millimeter *(Optional)
AC/DC Voltage0-660V auto/manual range, the min resolution is 0.1mV
AC/DC current660.0uA , 6.600mA, 66.00mA , 660.0mA, 10.00A
Resistance660.0Ω, 6.600kΩ, 66.00kΩ, 660.0kΩ, 6.600MΩ, 66.00MΩ
Capacitance6.6nf~66000uF, the min resolution is 1pf
Diode0~2V forward voltage, the min resolution is 1mV
Data holdHold and display the measured value
Relative measurementDisplay the relative power value
Continuity testingBuilt-in buzzer will sound, if resistance is lower than 30Ω
Testing speed3 times/ seconds
Data range-6600~+6600
Optical power meter *(Optional)
Calibrated Wavelength(nm)850/1300/1310/1490/1550/1625nm
Power range(dBm)-70~+10dBm
Connector typeFC/PC
Data holdHold and display the measured value
Relative measurementDisplay the relative power value
Visual fault locator *(Optional)
Visual fault locatorTest fiber’s bending and breakage ( SM and MM fiber)
TDR Test*(Optional)
TDR Testbreakpoint and short circuit measurement(BNC cable, telephone cable)
Power AdapterDC 5V(2A)
BatteryBuilt-in 7.4V Lithium polymer battery ,6500mAh
RechargeableAfter charging 6-8 hour, working time lasts 17 hours
Low ConsumptionEnergy saving technology, the battery icon real-time display
Operation settingEnglish/Chinese and other languages /OSD menu
Auto off5-60 (mins)
WorkingTemperature-10℃ ~+50℃
Working Humidity30%~ 90%
Dimension/Weight256mm x 173mm x 50mm / 1.2kg

Product Tags:

camera tester cctv


cctv monitor tester

Quality HD SDI Digital CCTV Tester 7Inch For POE Power Supply Testing for sale
Send your message to this supplier
*To: Chinasky Electronics Co., Ltd
Characters Remaining: (0/3000)
You may also be interested in :
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly