Static Resistant Clothing Flame Retardant Workwear with FR Cotton
1. 100% Cotton ( FR Treated )
3. Design Pockets with Vent-hole
|Fabric Material||Pyrovatex, or FR Cotton and FR TC|
|Specification||1.200gsm~240gsm weight of flame resistant cotton or TC Twill or
2.Concealed,two-way taped brass zipper,gripper at top of zipper and
3.One-piece topstitched,lay flat collar;
5.Two set-in front pockets,two chest pockets,two patch hip pockets;
6.Rugged safety stitched construction with felled inseams;
7.Side vent opening;
8.FR silver reflective tape on shoulder and leg,it can be added on
9.Application: Petrochemical and gas industry.
|Logo||We can embroidery or printing the logo for customers|
|MOQ/Order Details||200pcs. we also can accept small order|
|Packing Details||one pcs in a polybag, 20pcs in a carton, carton size: 58*40*36cm|
|Delivery Time||Sample for 15 working days, 40-55 for mass production depends on
the fabric stock|
|Payment Term||50% T/T Deposit, 50% Balance before shipping|
|Application||Petrochemical and gas industry,any need flame resistant performance
Service we supply
1) The new design and new materials are provided as your
2) We are pleased to be given a test order;
3) The OEM services are available;
4) One-stop service: Satisfy what you want;
If you have design want to make, we can do as follows:
1) You send us your design (samples or pictures or some ideas), so
that we could know what you want exactly;
2) We make the samples for you then send you the pictures and
samples by express;
3) As soon as you receive the samples and approve to us (if any
changes we will follow them), then you can place the order to us;
Care and Maintenance
Most flame-resistant garments can be handled safely using common
laundering and care procedures. However, a few precautions must be
followed to ensure your FR garments maintain their maximum
effectiveness. Remember: FR clothing is safety equipment that just
might save your life. It is imperative to make sure your FR
garments are properly cleaned and maintained.
Carefully follow the manufacturer's care label when laundering FR
garments. Many FR fabrics require mild wash and dry conditions to
maximize the life of the garment.
*Make sure FR garments are clean and in proper repair before each
*Remove oils and flammable contaminants from FR garments. Flammable
contaminants can be a fuel source that adds to burn injury.
*Repair garments using "like materials." Use FR fabric, thread and
components. Return garments to the manufacturer for repair, or use
an authorized FR repair facility.
*Wash new flame-resistant garments prior to wearing.
*Wash flame-resistant garments separately from standard clothing.
*Do not use chlorine bleach.
FR clothing can only provide protection if the wearer follows
garment manufacturers' recommendations for proper use:
*Do not put on or take off the garment in proximity of flammable
gasses, vapors, dusts or in other potentially explosive
*In potentially explosive atmospheres, proper grounding procedures
must be used.
*Wear garments with the appropriate arc rating as dictated by an
electric arc hazard analysis. Consult employer if unsure.
*Wear garments properly – collars closed, sleeves and cuffs down
and secured, shirt tails tucked, closures secured, and other
*Wear looser-fitting garments that provide adequate mobility.
*Do not wear non-FR clothing over FR garments. The outermost layer
must be FR
*Wear only FR or non-melting undergarments (e.g. cotton, silk,
*Wash garments thoroughly after each wearing to remove
Do we really need Flame Resistant clothing (we haven't had an
accident in many years)?
Flame resistant (FR) clothing saves lives because it significantly
reduces burn injury, gives the wearer escape time, and increases
chances of survival. Providing FR clothing demonstrates
management's commitment to safety and employee well-being. It can
improve morale as well as increase safety.
What do all these standards and test methods mean?
Performance standards and test methods allow users to objectively
evaluate materials, and define minimum performance criteria for
fabrics or garments. Using FR products that meet performance
standard requirements helps ensure your people are wearing
acceptable FR garments.
Is FR clothing uncomfortable?
FR clothing is a safety item for personnel working in environments
with a hazard of clothing igniting. There are many climates where
long pants and long sleeve shirts are hot, no matter what the
fabric is made of. A variety of FR fabrics are available today,
some of which are perceived as being more comfortable than others.
FR clothing does not necessarily need to be more uncomfortable than
How should FR garments fit?
The looser fitting the FR garments, the more thermal protection the
clothing system will provide. Air is a very effective insulator;
therefore, maintaining an air gap between the clothing and skin
will improve thermal protection. However, a loose fit must be
balanced against the hazard of clothing being caught in moving
equipment. Most FR products will shrink either the same or less
than standard work clothing, and should be sized accordingly.