CF8M Stainless Steel Lost Wax Precision Casting Of Valve Body , CNC
1. Valve body cast by lost wax Casting process;
2. Material: CF8M (AISI 316);
3. Size: 60X55X35mm;
4. Weight: 0.28kg;
5. Chemical composition tested by German spectrometer;
6. NDT can be operated.
CF8M Stainless steel lost wax castings for valve industries,
Minimum weight 10g, up to 80kg. We can trace the production route
with heat number.
We perform stainless steel lost wax castings in a wide range of
spectro range, please refer to below table for the most common
material that Winnington cast:
Stainless Steel (70%)
CF3M (AISI 316L), CF8M (AISI 316), CF8 (AISI 304),CD4MCu,
CD4MCuN,ANC20,1.4408,1.4517, 1.4306, 303, 430, 420, 17-4PH, SCS1
SCS16, SCS14, SCS13, 1.0619, WCB, WCC,S355JR, 1045 , LCC
Description of Investment Casting Process:
A wax die is designed and built to produce castings per customer
2. WAX PRODUCTION
A wax pattern is produced from the wax die which works a wax
3. PATTERN ASSEMBLY
Wax patterns are attached to runner system by hot knife.
4. CERAMIC SHELL MAKING
The pattern assembly is dipped into a ceramic slurry, coated with a
refractory material and get dried. The process is repeated until
the desired thickness and strength is achieved.
A high-pressure autoclave melts and remove the wax from the ceramic
High temperature ovens cure and preheat the ceramic shells before
Pre-heated Ceramic cluster are poured with the molten metal.
The ceramic shell is removed by vibration knocking.
Castings are cut off from the gating system.
10.MACHINING,SURFACE FINISH,AND INSPECTION
After cut off and gate removal, all secondary finishing operations
like linlishing, shot blasting, CNC machining are performed. Each
casting is inspected according to customer specifications and
Casting process type
silica sol lost wax casting
CNC machining,CNC lathe
electro polishing, satin, hand polished, pickled, zinc plating
Raw Casting tolerances in drawing are according to DIN
VDG-Merkblatt P-690; Dimension less than or equal to 24mm will in
accordance to D1 standard; Dimension greater than 24mm will in
accordance to D2 standard
Pumps & Valves
Power & Energy
Marine and Oil
Other Mechanical Castings
For lost wax casting method:
- Allows greater design freedom high complexity parts
- Can cast a wide variety of alloys even which melting temperature is
higher than die steel
- Yields lighter, stronger metal parts with superior finishes
- Reduces greatly on tooling and machining costs
- Possible for rapid prototype development
One-stop Services of Winnington Casting
Winntington has strong technical support and full range of casting
facilities and testing instruments to cater the growing investment
From wax die making, wax injection, pouring, secondary machining,
welding, heat treatment, polishing, to surface finishing etc.