200ml - 2000ml 3 In 1 Electric Juice Filling Machine For Water /
automatic juice filling machine
The automatic juice filling machine adopts special three gate
filling valve, which can be applied to the filling of water type or
paste type products, especially to the high sticky material(such as
seed coating, emulsifiable concentrate, oil and honey etc) . It has
obvious effect and high precision.
It is controlled by PLC, and matched with 6 inch screen of
human-computer interface system. The whole process of bottle enter,
fill and release are all automatic controlled. The electrical and
pneumatic components all adopt international brands, which ensure
the outstanding quality and permanent stability.
Adopt anti-stretch and leak proof filling bulkhead,, ensure no
leakage or stretch after filling.
Main Technical Parameters:
Bottle Diameter Applicable
Volume of filling
Size of whole machine
The machine can be customized according to customer’s requirement.
1,The all machine applies bottle handling technical and the filling
valves go up-down when filling, which make sure the bottle filling
goes stable, reliable during high speed. The bottle handling
technical also make the different bottle changing easily without
changing too many accessories.
2, This machine uses new generation stainless steel spring washing
clips and the clips do not contact the upside of bottle screw
avoiding the second pollution. It can both clear the inside and the
outside of the bottle.
3, The advanced normal pressure filling principle was applied.
Filling is quick, and stable. Not contacting with the liquid avoids
second pollution and oxidation.
4, This machine applies magnetic force screw type sealing,
realizing auto grasping cap, sealing. The sealing cap force can be
adjusted. Independent electricity box makes sure every electrical
appliance works normally.
Electricity Brand LIst:
Motor: SIEMENS BEIDE Speed reducer: JIE brand Hangzhou
Invert speed control: Japanese Mitsubishi
PLC: Japanese Mitsubishi
Touch screen: TAIWAN Electricity appliance: SIEMENS
Volume of PET bottle : 0.25L-1.5L Diameter of bottle: 50-100mm
Height of bottle: 170-320mm Cap diameter:
plastic screw type cap diameter from 28-38mm
Filling temperature : 85 Filling precision : ±2-3%
Pressure of washing : 0.2Mpa
Washing consuming clear water: 1000kg/h
Gas consumption: 0.4m³ /min
Power of main motor: 5.2KW