Abrasive Zirconia Alumina Oxide Sanding Belts , Grit 40 To Grit 100
WEEM 3128 anti-static, self-sharping Zirconia aluminum, waterproof
polyester segmented belts are designed for very wide panel and
WEEM 3128 Zirconia Aluminum belts are design for sectional belt, or
segmented belt. YY weight polyester backing is use; it provided
both stiffness strength and tensile strength, idea for sectional
belt. Anti-static treatment made on backing to delay or prevent
Zirconia Alumina, ZA, is recognized by its blue color. A rugged
synthetic abrasive that is best suited to stock removal
applications. The heavy duty structure requires heavier pressure to
break down the self-sharpening grains. It is ideal for heavy
grinding on ferrous and non-ferrous metals and planning hard woods.
This abrasive can last up to 5 times longer than aluminum oxide on
tough applications. This gives the grain a longer cutting life and
is especially suited to coarser stock removal applications
typically grit 40 to grit 80. For panel industrial, the customized
belt size can be 1950mm x 2800mm or 2650mm x 3200mm etc.
A strong bi-direction tape splice is used. Joint of WEEM 3128
segmented belt offer 2 types of joints
Tap on gain line joint: as default.
Tap on butt line joint:
Woodworking/ /MDF/HDF/OSD/Partial board/Chip board
Yy weight polyester; waterproof cloth backing
Resin over resin
1828mm/72” ~ 3300mm/130”
It is made for wide belt sander, such as: Steinemann, Imeas, Sofuma
etc. it offer great performance and durable with heavy duty
grinding and sanding needs.