1The empty barrels get into the machine by transmission chain
automatically. After two times inspection by count sensor, the
barrels will be blocked by blocking cylinder. At the same time,
rear de-cap cylinder down to cover the cap; rear cap grabbing
cylinder up to grab cap. Then the de-cap cylinder reset to de-cap
2.After several seconds, the two de-cap cylinders reset, then cap
grabbing cylinder down to release caps. Meanwhile, the cap blowing
electromagnetic valve starts to blow caps. The barrels that have no
cap get out of the de-cap machine automatically. After two times
inspection by count sensor, de-cap and blocking cylinder reset.
3After inside and outside brushing, the empty barrels get into the
automatic feeding system.
4When the number of barrels reaches 4, the blocking cylinder will
stop the barrels
5rear barrel pushing cylinder reset after pushing barrels on barrel
6rear barrel reversing cylinder turn barrels to flat and be ready
to get in.
7 The rear barrel pushing cylinder push barrels into barrel washing
base then reset.
8 Barrel washing spindle works, then barrels moves a working
position to be inverted by the action of conveyor chain