mainly advantagecompared with competitors:
1. Ultrasonic sensors:
Their mowers only have bump sensors, that means they need to bump
obstacles to change a new direction.
S510has ultrasonic sensors, it could avoid obstacles before the robot
bump them. It's more safe. What's more,S510also have bump sensors, in case ultrasonic sensors are
2. Touch sensors:
Their mowers don't have touch sensor function.
OurS510have TOUCH sensor localed on the handle. If anyone don't familiar with this robot try operate the robot from Handle during it is
working, the robot stops working within0.5seconds. It's also a safetyfunction.
The pressure sensor located on the top cover, if a kid sits on the
mower, it stops working within 1 second.
S510have compass function. It could helps the robot works good on a
5. Max virtual wire.
Our robot mower could use 600M virtual wire to set the perimeter.
The competitor's may only could use 100-200m wire.
If there has obstacles put on virtual wire, the competitor's robot
can't avoid it just keep walking forward. Ours could avoid it and
get back to virtual wire again.
7. Brushless cutting motor
It's with longer use lift compare with the brush motor, the
brushless motor with lower noise.
8. use the best spareparts
We useSamsung lithium battery.
9.software upgrade available
There is insert connector under the bottom base, user can use the
usb connect the computer and mower, then update accordingly.
10.cutting height easy change
User can adjust the cutting height just by rotating the knob under
the shell, no need to change blade any more.
11.Safety protection, errors automatically alarm
The mower will alarm when something is wrong, the display will show
the problem accordingly.
In a large lawn, user can separate the lawn into at most three
parts and set working schedule in each area, which increase the
coverage(for once charging): 800square meters
working capacity:2600square meters
virtual wire maximum lenth:600m/0.5mm
mower size: 62*50*28.5cm(L*W*H)
noise:less than 60dB
blades qty: 1pc
charging time:less than 3h
average working time:2-3h
wireless remote control: 6m
type of battery:lithium
Indoor Input Voltage:80-240V,50-60hz
Inside Packing Accessory(Spare part):
2.Inner hexagon spanner
3.virtual wire connectors(10pcs)
4.Virtual wire (100m)
7.Remote control battery
Our standard packing:
1.Pack the sparepart into two small neutral box(size:25*11*14.5cm)
2.Pack the robot lawn mower inside a pearl wool bag
3.Both of above will be protected with styrofoam to resist damage
4.Finally packed in cardboard carton, then fasten with plastic
Charging station size:78*50*17cm(L*W*H)
Rain Cover optional: to protect the charging station as well as
Rain Cover material:PC
--How does it work?
The robot lawn mower has two work mode:
1.Auto mode: let the mower work automatically, enjoy your time with
2.Manual mode: operate through remote control
Four steps to safely start the mower:
--1.Connect charging station with power supply by charger, and make
the recharging light is in green color.
--2.Connect virtual wire to charging station, and make sure it is
good connecting(virtual wire light in colorless).
--3.Turn on the power button and release the emergency switch.
--4.Input password if selected and select mode.
--Why choose us?
2. customization service
4.Productions tested one by one
5.independent R&D group to support best services
6.necessary certificates to European market(CE,ROHS,4P)
Sole Agent in France.
Warranty: 1 year
we will offer free spare part for change and our independent
R&D groupsupports the after sale services.