Stainless Steel Automatic Palletizing Machine With SIEMENS Sensor
Palletizer is suitable for palletizing of carton, plastic crate,
shrink wrapped pack and five gallon bottle etc. It consists of case
feed, marshalling station, pusher, pallet feeding etc. Optional
interlayer adding device keeps the layer more stable, it can be
designed for different palletizing requirements with capacity
ranging from 24000 to 72000BPH.
Single layer palletizing (cycles)(s)
Dimensions of pallet(mm)
1. Equipped with device to collect cartons with tactic form needed
2. Inspection device is set for inspecting the storage of cartons
on conveyor, automatic speed regulation according to inspection
3. Simple configuration and easy maintenance.
4. The safety device can stop machine and alarm automatically in
Main structure and principle
1. Roller conveyor and pack turning device
It can rotate the pack 90 ° when the pack needs to rotate 90°it is
in a position of pack rotation and the block activated by the
2. Two speed belt conveyor
There are two belts front and back, speed of them is different. The
distance between two packs increased when pack passes the belts.
3. Classification yard has the function of pack arranging, which
can arrange the packs to needed palletizing type.
4. There is a device to monitor packs, and adjust the production
speed according to the monitoring data.
5. Automatic control counting and sensor cooperating, the rod
pushes the packs on to the transit board, the packs are arranged to
a layer then palletized (the counting sensor installed at the entry
of classification yard.
The structure simple, compact and high efficiency, stable
performance, easy adjustment when changing pack size, can satisfy
different customer requirements.
The main machine moving wheel choosing Sweden FAG brand, main
driving shaft choosing good brand, linear bearing using (Taiwan
Jinheng), to ensure long term and stable running.
7. Pallet dispenser
It can release from full pallet and collect for each single empty
pallet, can store 10-15 pallets.
8. Pallet conveyor
Usingφ89 carbon steel or stainless steel pallet roller conveyor,
side plate made of high quality carbon structural steel and surface
baking finish and anti-rust, using Harbin or NSK bearing, pallet
protection for front and back position of forklift.
Sensor control, it will stop when there is no pallet, to saving
9. Simple structure and easy to maintain, control cabinet doors are
fitted with sealing strip, with good quality ventilation and
filtration device. It equipped with multi-layer alarm indicator,
the touch panel can display a different fault (fault to be reset,
automatic fault reset, running indication etc.) The program design
is reasonable, function of fault indicating. The machine will stop
when the pallet falling and loosing.
10. It can stop and alarm automatically when the machine is in a
11. Warning signs posted, to improve the safety awareness of the
1. Power supply:380V(Max.±10%)50Hz 3PH+PE
2. Low pressure control:SIEMENS(SHNEIDER)24VDC
3. Electric cabinet protection degree IP54
4. According to IEC603323-3A CEI 20-22II standard flame-retardant
insulation(coating according to DESINA standard)
5. Sensor SICK
6. HMI SIEMENS(SHNEIDER)
7. Main switch:SIEMENS(SHNEIDER)
8. Electromagnetic switch:SIEMENS(SHNEIDER)
9. Thermomagnetic switch:SIEMENS(SHNEIDER)
10. Control system:SIEMENS
11. SEW motor
12. DANFOSS inverter
13. Other electric equipment protection degree no less than IP54
14. Electrovalve accord with ISO505599/1/0 standard
15. Cylinder accord with ISO 15552 – VDMA 24563-02 standard
1. Temperature:Min.+10 º C –Max.+45 º C,Fluctuations in daily
working ±3 º C
3. Set according to attitude of 1000 meters
4. If the above conditions can not meet or exceed the size
specified in the contract, the customer shall immediately notify
the VANTA sales department in order to make the appropriate
adjustments to ensure the normal operation of the machine. If the
customer fails to notify the sales department. Any caused machine
problems, will be customer’s responsibility.
Equipment material and baking varnish
1. Equipment material
A:Pack conveyor and pallet conveyor made of stainless steel, side
plate made of high quality carbon steel, surface baking crude
silver paint (Different customer requirements)
B:Main transmission parts 45 # steel (key parts 40Cr) after heat
treatment and surface treatment, rack, frame and others made of
high quality carbon steel.
2. Baking varnish
A: Machine frame SAZ 2.5 sandblasted, accord with SIS standards and
by solvent degreasing.
B: Blasting in the160o C Oven. Neat appearance, bright color, deep
blue color (depending on the different requirements of customers)
as basic color, a reasonable match. Moving parts and safety fence
use warning signs and warning color (moving part is the red / black
stripes, protective part is yellow / white stripes).