The product is modified epoxy glue with two components and could be
solidified at room temperature. Clear, could be used for all kinds
color of plate, easy use, strong adhesive strength, resistant of
water, polishing, acid, aging, cold-hot exchange, low stress. It is
very useful to bond and repair of the stone material.
Scope of Application
Widely used to bond, cure, fix of the stones, pottery, metal.
Especially for the request of good looking, clear, varnish and the
treatment of surface.
1. Remove oil, dust, water on the material to be bonded and
keep clear, dry.
2. Mix the glue of part A and B at rate of 1: 1 evenly.
Spread the glue onto the place to be bonded and stress. Go on next
procedure after 24 hours when solidifying at normal temperature. In
winter, heat the stone to 50-60Centigrade when the glue is first
solidified, 2-3 hours later can continue next working procedure.
3. Add different color paste and paint to make the glue the
same color as the stone. The qty of color paste is 1-2% of glue;
Paint is 10-20% of glue.
4. Wash the additional glue with acetone or ethanol before
1. Operating temperature should be over 5Centigrade. In
winter, heat the plate.
2. The glue should be adjusted on the spot. And use up the
glue within usable time. Glue qty should be increased and usable
time is reduced if the temperature is raised.
3. Do not mix using of the implement for A and B parts. And
do not place back the balance mixed glue into the packing barrel.
4. Add 3% ethanol absolute or acetone to dilute the glue if
the viscosity is too large. Also could heat the glue in the hot
water of 40-60Centigrade to lower the viscosity.
5. Make a trial usage in advance to avoid mistake according
to the different physical, chemical property of the stone.
Storage and Packing
1. With one year life time in cool, ventilated and dry
condition. Can go on use if test valid after the validity period.
2. Noninflammable, non-poisonous after solidify and can
3. Packing size: 2kg/set (18kg/ctn) in plastic bottle.