FN271F high speed carding machine is applicable to open, card and
blend chemical fibers and mixed fibers, condense them into wool
tops of certain specifications, and then coil them into sliver can
regularly for the following process.
Features: 1, feed-based metal parts, hardware detection and cotton
debris layer thickness from the stop to protect the machine safety.
2, with the speed of roller stop device is too low to prevent the
occurrence of blocking cars.
3, with the top off device shall stop.
4, has a suction device to draw air flying machine short fiber wool
to prevent traffic congestion, lower frequency.
5, enter the gross floor Autoleveller system by the automatic
adjustment in order to ensure the stability of uniform tops.
6, three workers and a Four-cylinder automatic for loop can be
further reduced the labor intensity of workers.
7, electrical control cabinet installed on the machine in front of
the rack, touch-screen machines installed in the casing on the left
side of the front, easy to operate, increasing the work space.
8, automatic control of a programmable logic controller and touch
screen communication, through the touch screen to set up and modify
the process parameters and the right time to observe the operation
of moving parts and the emergence of state failure, employing
dialogue machine programmable logic controller control the
frequency converter so that a more stable, thus ensuring the normal
operation of the machine.
9, the whole casing closed safety, appearance neat and
|HIGH SPEED CARDING Machine width||1200mm, 1500mm||Licker-in speed||600 RPM(frequency control)|
|Applicable material||Chemical fiber and its blendings, with the length 25-127mm
and the finess 0.8-30D||Doffer working dia.||Î¦650mm|
|Feeding form||Double-box volumetric type automatic continuous feeding with
photoelectric control||Doffer speed||10-75RPM (frequency control)|
|Delivery tops weight||7-20g/m||Coil type||Manual type 3-position or 4-position automatic can changer|
|Total draft multiple||32-140||Applicable sliver can specification||Î¦600*900mm, 400*1100mm|
|Max. delivery speed||200m/min||Total power||12kw|
|Max. productive capacity||240kg/h per set||Floor face||Width1.2 11000*2290|
|Width 1.5 11000*2590|
|Cylinder working dia.||770mÎ¦mm||Machine weight(L*W)||11000kg|
|Cylinder speed||400 RPM(frequency control)||Consumption for dust suction(continuous)||2200m 3 /h per set|
|Licker-in working dia.||Î¦250mm|| || |