1. Wireless trigger.
2. Remote control distance more than 100m.
3. Super low power consumption.
4. Saving on battery.
Become picture perfect and capture fantastic images with this
wireless remote control release.
With the remote control you can be stood up to 100m away from your
camera, even behind a wall, and the photo can still be taken at the
touch of a button. Therefore, it is the perfect solution if you
want to take that family photograph and you actually want to be in
it. No longer do you have to set the timer and quickly run into
position, which more often then not leaves you looking rushed and
unprepared, now you can take your time to make the family photo
The remote control is also perfect for professional photographers
who want to capture an image whilst observing from a distance e.g.
with animals. Or even for amateur photographers who want to capture
the birds in their garden without sitting out in the cold, capture
your image from the comfort of your home whilst looking out the
The wireless receiver is extremely easy to install via the remote
input, and the release trigger provides a 2-stage release (auto
focus, release) to provide you with the opportunity to be able to
take great, high-quality professional looking images in the click
of a button. With 16 channel technology -and equipped with an
additional series release and time exposure functions, it is a must
have for any keen photographer!
1. VF-902 wireless flash trigger is using global free 2.4GHz
channel and FSK modulation system, and VF-902 wireless flash
16 selectable frequency channels.
2. Flash sync speed is up to 1/250s.
3. Fire the flashgun through hot shoe part and fire the studio
light through 3.5mm to 3.5mm cable. (you can change 3.5mm to 6.35mm
via attached convert adapter)
4. Supports to control multiple flashguns and studio lights at same
5. Shutter function mode, included single, continuous, bulb and 4
sec delay shooting.
6. Supports to control multiple cameras to take shots at the same
7. Operating distance is more than 100 meters.
8. Ultra-low standby power consumption; transmitter standby time is
more than 2 years, and receiver standby time up to 300 hours.
9. Power supply use 2*AAA batteries.(Transmitter and Receiver).
10. The wireless flash trigger is also perfect for professional
photographers who want to capture an image whilst observing from a
Applicable To: Canon
Type: FSK 2.4GHz Wireless System
Operation Range: 100M
Transmitter Stand-by Time: 2 years or >10000 Timer (2pcs AAA
Receiver Stand-by Time: 400 Hours (2pcs AAA alkaline battery)
Transmitter Measurement (W x L x H) : 76mm x 36 mm x 35mm
Receiver Measurement (W x L x H) : 76mm x 61 mm x 38.7 MM
VF-901TX 1 pc
VF-901RX 1 pc
Hot shoe adapter 1 pc
Instructions Manual 1 pc
3.5mm+3.5mm Flash Cable 1 pc