Home > Geosynthetic Clay Liner >

SBS waterproof membrane for roof

Country/Region china
Company Shouguang Huayuan Machinery Co., Ltd
Categories Low Price USB Sticks
Telephone 0536-5519227
ICP License Issued by the Chinese Ministry
  • Product Details
  • Company Profile

SBS waterproof membrane for roof

Products Your present positionHOMEProducts
SBS waterproof membrane for roof

Product introduction SBS elastomer modified asphalt waterproofing membrane is SBS (styrene-butadiene-styrene) thermoplastic elastomer modified asphalt coating

material to high-quality polyester felt, glass fiber carpets, glass fiber reinforced polyester felt For the fetal base to fine sand, mineral aggregates,

PE film, aluminum and other materials for the cladding material, using special mechanical mixing, grinding made of elastomer modified asphalt

waterproofing membrane.

Product characteristics1, impervious to strong.2, high tensile strength, elongation, good dimensional stability, shrinkage and cracking on the grass to adapt to strong3, high and low temperature performance, SBS is suitable for low temperature environment, building waterproof, and APP is

suitable for high temperature environment of the building waterproof.4, resistance to puncture, resistance to break, tear resistance, corrosion resistance, mildew resistance, good weathering resistance5, the construction is convenient, hot-melt construction of the four seasons can operate, reliable joints.

Product scope1, the focus of waterproofing works and industrial and civil buildings of the roof, walls, basements, bathrooms and other waterproof and moisture;2, bridges, roads, car parks, swimming pools, tunnels, reservoirs and other buildings waterproof;3, especially for structural deformation frequently and cold areas of the building; pipeline, coating protection and ensure that moisture.

Product construction methodsCoil can be used alone hot or cold sticky construction method, can also be used hot and cold combination method

that is a large area with cold stick method, take the seam parts of the hot melt method for construction.1, hotmelt method: flame spray gun or burner at the bottom of the coil and the substrate evenly heated until the surface

began to melt and black asphalt bright state, while baking side paving sheet, and the use of roller compaction. At the same time

should pay attention to adjust the flame size and speed, so that the asphalt temperature maintained at between 200-2500C.

After construction, should be re-use of cold adhesive on the lap side sealing treatment.2, cold stick method: with a rubber scraper to polymer modified asphalt adhesive or cold Ma fat and other cold

adhesive evenly brushing the surface of the grassroots level, and control the thickness of uniform, edge shop roll with a rubber

stick to promote the roll side Remove air to compaction. When the ambient temperature is lower than 15 ℃, the hot-melt method

should be used to deal with the site of the lap and the closing parts of the coil.

Has been viewed 165 hits
Previous: Low price SBS/APP wa Next: Factory direct SBS m
Quality SBS waterproof membrane for roof for sale
Send your message to this supplier
 
From:
To: Shouguang Huayuan Machinery Co., Ltd
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0
Company Info
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly