Main technical parameters of DXF series pulverizer:
1.function: It can fastly grind up all kinds of drugs and materials
3.Please refer to the label on the product for technical parameters
such as productivity, motor power, bearing rotation speed and so
Features of DXF series pulverizer:
1.With the advantages of small-size and good-looking, the grinder
is mainly consisted of motor, blade, electrical components and so
2. Greatest advantagesTaking place of the design of screw thread,
this machine adopts point buckle type design ,operation becomes
3. prevent the phenomenon of blocking ,more steady than the first
generation of pulverizer.
1.Open the upper cover and put the material inside.
2.Close the upper cover tightly.
3.Plug in and turn on the timer switch, then turn on the switch for
sound will be heard ).
4.Turn off the switch (When you hear the sound rolling evenly, the
material has been
grinded into powder,then you can turn off the switch).
5.Open the upper cover and take the powder out.
Notice of DXF series pulverizer
1.material cannot be greater than 1/2 of the bowl
2.material must be dry .don't put in damp and grease material .
3. just after starting, if crushed material causes the blade get
stuck, the motor doesn't work , power it downso as to prevent motor
from damage,then use it after cleaning.
4.It is take 1 minute for general medicine,will need more time for
special medicine.Don't use it too long .Prevent powder from
sticking to bowl.
5.Continuous work for long time is not allow .Don't over 5 minutes
each time.When material is much, pls let it rest in the process.
Prevent motor from damage caused by hot bearing.
6.Pls check attrition rate of carbon brush and blade.Replace
accessories when it is necessary .
7.Prevent damage caused hitting the ground .Pls put is on the
8. When the motor doesn't run ,pls check the line and fuse.
9.Don't use it when the cover is open.
10. spare parts：blade 2 pcs;carbon brush 2pcs;hairbrush 1pc;fuse2
11、 after sale Service Hotline：4006777774
300g sealing type grinder