ZYS Single stage Vacuum Insulation Oil Purifier
ZYS Single stage vacuum insulation oil purifier is used for removing moisture, gas, particles from the transformer
oil, insulating oil, switch oil, cable oil, and electric condenser
oil. In this way, it can improve oil dielectric strength very
quickly and effectively. ZYS vacuum oil filtration machine is
mainly used for the power station, industrial and mining
At the same time, ZYS machine can be used to power equipments to
vacuum drying, and vacuum oiling.
A: removing the moisture. The final treated oil can achieve less
B:degassing. The final treated oil can achieve less than 0.1%;
C:removing particles. The fina; treated oil can achieve NAS6 Grade
The final treated oil index:
ZANYO outstanding features:
A.Evaporation chamber is horizontal, and oil chamber is vertical,
the two chambers are separated, therefore the maximum utilization
of degassing chamber space.
B.Unique technology: Atomizer is placed upside down, the oil
droplet average diameter less than 30m, to increase evaporation
area and extend the degassing time. Comparing to the one- vertical
chamber machine, ZYD-I filtration system is 3 -fold and 5-fold
quickly and effectively thank old machine.
I.Using high-density heater, heating load is less than 2w/cm2; in
this way, to lower down the surface temperature of heater, to
prevent oil ageing and oil cracking.
II.Controller with powerful management functions, PID regulation
technology along with level sensor and temperature protector,
completely protect heater from high surface temperature.
III.Multi-stage precision filtration system, mesh filtration
combined with molecular adsorption technologies, solid particle
interception rate can achieve 99.99%, Cleanliness can achieve NAS 2
IV.The cooler is in front of vacuum pump, to reduce water enter
into the vacuum pump; in this way, to protract the lifetime of
V.Foam sensor can monitor foams when machine working.
VI.Adopts interlocked protective system, which connects oil pump,
heater and liquid level sensor, avoiding blank heating, blank
pumping, oil leak and electricity leak. If there is any fault,
machine will be power off automatically.