Garlic Powder Production Line
300Kg/ h Handling Capacity Garlic Powder Processing Line
This is a new technology method of producing garlic powder, first
use the garlic separating machine to separate bulbs into cloves,
then use garlic peeling machine to peeling the skin, these two
machines is with air compressor, simulate hands method to separate
and peeling. Then slice the cloves into small slice, which will be
helpful for drying and grinding .Then drying the slices and then
use grinding set to grind them into powder, then into packing.
1. Garlic Separating Machine
This machine uses food-grade silicone , the garlic, squeeze rub the
bulk of the split up and down the gap and the centrifugal force of
the silica gel plate , garlic stems, garlic, built-in fan while
blowing away from the machine, can be recycled ; separated good
large garlic cloves rolled out from the machine on the other side .
Main Technical Parameters:
Main frame power: 1.1Kw
Fan powder: 0.375Kw
2. Garlic Peeling Machine
This machine should be equipped with an air compressor. Because of
the strong air flow produced by air compressor, the cyclone peels
off skin of onions smoothly, with low damage rate. It is suitable
for those garlic processing industries.
Air compressor: 7.5KW:2 UNITS/15 KW:1 UNITS
Air flow: 2m3/min
3. Garlic Slicer
1)Introduction of the machine:
The output of the machine is 300Kg per hour. It can be easily
controlled, and high production ability. The slicer is evenly thick
and smooth. The thick size also can be adjusted.
2)Application of the machine:
The machine can slice ginger, garlic, shallot, potato, taro, yam,
bamboo shoots, etc of the solid vegetable and fruit.
3)Parameters of the machine:
4. Garlic Slice Drying Machine Set (Hot Air Circulating Type)
Specification of CT-C-II
1. Type: CT-C-II
2. Capacity: 250kg/h
3. Overall size: 2300mm×2200mm×2000mm(L×W×H);
4. Working room size: 2700mm×2040mm×1500mm(L×W×H);
5. Fan:power: 0.45Kw, 2pcs 380V, 50Hz;
6. Electric heater: 20Kw
7. Baking tray: 640mm×460mm×45mm ,96 pcs;
8. Baking trolley: 940×710×1450 4 pcs;
9. Heat exchanger: aluminum winding carbon steel pipe, 2*40m2;
10. Working temperature: 50-100℃(adjustable)
11. Circulation fan for circulate heating;
12.Control system:heating control, temperature display and setting
control, fan working control.
13. Material contact part stainless steel.
5. Garlic Powder Grinding Machine
Water-cooled device universal grinder (hammer grinder) is made of
high quality of 304 stainless steel, with national standards motor,
are especially for spices, herbs. Fineness of 10 to 120 mesh,
according to the nature of the materials,different water content,
powder fineness different.
6. Garlic Powder Packing Machine Set
The machine adopts the most advanced micro-computer chip control,
with the photoelec