Briquette press machine is used for coal ash, ore, desulfurization
gypsum, phosphor gypsum, coke dust, iron powder, mill scale,
fluorite ash, manganese ore cocentrate and other material pressing
into briquette, which can be pressed into round ball briquette,
oval briquette, pillow briquette, square briquette and so on, or
can be produced as customer require.
This briquette press machine is mainly used in the field of
refratory industry, coal,and metallurgy industry, etc. Briquette
press machine, the core part of rollersadopt high-quality manganese
steel materials 65Mn or high alloy 9Cr2Mo based on different
material characteristics, greatly improving roller wear resistance
and pressure, make the machine has a long service life, so very
popular in recent years.
The briquette press machine production line generally includes
double hopper batching machine, grinding machine and mixing
machine, briquette press machine and drying machine.
1. The different kinds of raw material is evenly mixed by batching
machine in the first step.
2. These material goes into wheel grinding mixer or double shaft
mixer machine to further mixing, at this moment, the binder
material will be put into together.
3. The mixture material will enter into briquette press machine for
molding, and discharged various briquette shape according to
4. Because the fresh briquette contents moisture, couldn’t be used
directly. The briquette drying machine or belt dryer, as well as
vertical dryer will give them completely drying process. The final
dried briquette can be smelted, transported or heating directly.
Briquette press machine installation must do waterproof treatment.
For suspension type installation, there is gap between briquette
press machine and bracket rotating joint. In case of rain and snow,
water will penetrate inside along gaps, causing damage. Thus, when
installation, should adopt waterproof sealing measures, put an end
to rain or others flow into briquette press machine from screw
interface. Mounting bracket is also very important, recommended
It fully considered waterproof problem, like to design based on
inclination degree, which make coal balls machine screw connection
end slightly higher. Even if water flows into bracket, it will be
back to column finally instead of briquette press machine.
Therefore, if users make bracket themselves, should fully
considered waterproof factor. Why bracket inside have water
droplets? In general, daytime temperature is high, column inside
water vapor goes to bracket. Nighttime, temperature lowered, water
vapor will condense into water droplets, and condensed on support
When there is no inclination design, or reverse inclination
direction, water droplets will flow into briquette press machine
along edge, causing damage. In order to reduce water vapor goes
into bracket, we can seal connection part of bracket and column
with plasticine or silica gel.