This small briquette machine is widely used in making powder
materials into briquettes, pelleting, ball forming. What kind of
material can be processed? The Kaolin clay, oil shale, urea
fertilizer, sand powder, mill scale, coke fines, iron dust, gypsum
powder, carbon black, converter dust and son on.
all can be pressed into popular briquette shape in market. So, the
small briquette machine is really a multifunctional one! The
finished fresh briquette is energy saving and environmental
protection, convenient transportation, improve the utilization rate
of waste, with advantages of continuous production, high
automation, good economic and social benefits.
The small briquette machine has 1-6t/h output briquettes
production, The size and shape of briquettes is customized, but
commonly be produced into 25-50mm diameter, the shape shall be
oval, round, pillow, square, etc.
Different materials will be designed into different production line
workflow, customer needs to tell us of the materials’ moisture,
particle size, yield, briquettes size, shape, some special
circumstances maybe need auxiliary equipment such as other crusher,
mixer, screen mesh, vibration sieve, binder feeder, briquette
drying machine, etc.
Small briquette machine power motor drive reducer through V-belt,
through coupling send driving force to active shaft. Active shaft
connected with active gear, and passive shaft connected with
passive gear. When active shaft running, active gear will act on
passive gear rotate, so as to move passive shaft to running, in
that case two rollers running synchronized (same speed opposite
Passive roller is held out against hydraulic cylinder piston,
hydraulic system cause circuit, hydraulic system control valve
guarantee system pressure. Material feed into small briquette
machine hopper evenly by dosing device, and can be controlled by
hopper adjusting baffle. Same speed opposite rotating roller
molding pressure for material from smaller to bigger, when reach to
roller contact point, pressure reach to maximum. The briquette is
molding successfully. When material pass through, the molding
pressure become smaller and smaller, briquette fall off smoothly.
|Model||Reducer||Ratio||Roller Size(mm)||Main Shaft Speed(r/min)||Matched Power(kw)||Capacity(t/h)||Pressure Type|
|Remarks||1. Above capacity is based on coal density 0.8, briquette size
|2. Roller material is 65Mn, High chromium alloy and 9Cr2Mo.|
|3. According to different material, parameter will change slightly.|
Packing and Delivery: Seaworthy packing as per export container
rules, bigger items loose stuff in container and small parts will
be tied up in a bundle put into steel boxes or plywood boxes.
Delivery will be arranged based on busy or low producing season in
our factory, single set machine is normally not more than 40 days,
production line is in 2 month.
Small briquette machine can be listed into common briquette press
machine, dry powder briquette press machine, high pressure
briquette press machine. Common briquette press machine is also
called wet briquette press machine, because in molding, material
need to add binder and water; high pressure briquette press machine
is mainly used in smeltin