Charcoal dust briquette machine is mainly used to briquette
charcoal leftover, small pieces of charcoal, charcoal waste, etc.
and make them be fully used to increase its economic value. The
final briquette shape and size both can be customized from 25-60mm
with oval, pillow and square shape as well as other favorite shapes
in market according to special requirement. In addition, the raw
material range is very widely, like coal powder, fertilizer, salt,
iron powder, and gypsum, chrome, copper, etc.
(1) We offer three types of pressure: spring disc, wedge block and
hydraulic: Hydraulic type has larger pressure, even some uneasy
shaping materials, such as dry powder, fertilizer, salt, etc, can
also press in good shape, the pressure can be adjusted according to
different raw material.
(2) Because charcoal dust is just a little light, easy to be
molded. The roller material adopts 65Mn is enough. Normally, this
kind of roller can use 8-10 month.
(3) We also produce four-rollers type of charcoal dust briquette
machine. It has two smaller roller on top, two big roller down.
Four roller together to squeeze charcoal dust in briquetting, so
discharged briquettes are very strong.
(1) Inlet charcoal dust better to be 5-10mm, as all know, the
smaller the material, the better the briquettes.
(2) The material can’t be mixed with metal material, or the mold is
(3) The raw material moisture need be controlled between 12%-15%.
(4) A good percentage of binder mix charcoal dust and water, we
will offer in detail once order confirmed.
|Model||Reducer||Ratio||Roller Size(mm)||Main Shaft Speed(r/min)||Matched Power(kw)||Capacity(t/h)||Pressure Type|
|Remarks||1. Above capacity is based on coal density 0.8, briquette size
|2. Roller material is 65Mn, High chromium alloy and 9Cr2Mo.|
|3. According to different material, parameter will change slightly.|
Packing and Delivery
Seaworthy packing as per export container rules, bigger items loose
stuff in container and small parts will be tied up in a bundle put
into steel boxes or plywood boxes. Delivery will be arranged based
on busy or low producing season in our factory, single set machine
is normally not more than 40 days, production line is in 2 month.