Wheel grinding mixer machine is suitable for mixing powder and
granular material, such as charcoal pieces, cement, clay, flue
dust, chrome, copper powder, slag, tailing, sand, etc. widely used
in briquetting production line, and refractories, ceramics,
building material and other industries, etc.
Inside stirring tank, there are two grinding wheels rotating with
scraper synchronously, which makes sticky material reach to ideal
mixing degree in short time in the process of continuous stirring
and grinding. According to different material specific gravity,
each time output 0.1-1.8m3, stir 4 minutes. Discharge valve adopts
automatic control, when material is stirred 4 minutes in tank,
discharge valve open to release material and close automatically
after discharge. Then feeding material again.
Wheel grinding mixer is mainly composed of the grinding wheel,
grinding disc, mixing room, scraper, transmission device,
deceleration device, discharging device, frame and so on. The
height of wheel can be automatically adjusted, when have a large or
hard material, the rolling wheel can automatically rise over the
hard material, due to its own gravity and automatically fall.
The grinding wheel and rotating shaft is connected through the
crank. Motor drive speed reducer, and driven by the roller,
scraper, transmission device composed of rolling device rotation.
In the process of rotation, rely on the weight of the wheel the
material is mixed. At the same time, the rotation of the wheel is
affected by the friction force.
After the material is stirred evenly, open the discharging device,
material is discharged from the scraper to the discharge port.