Static Torque Transducers
LOCATIONHOME >PRODUCTS > Torque Measurement > Static
1913/1993 Static Torque Transducers
Based on BCM’s advanced strain gauge technology, 1913/1993 static
torque transducers are made from either alloy steel (1913) or
stainless steel (1993) and sealed to IP 66 protection grade.
1913/1993 static torque transducers are operated in the following
way: one side of the transducer is fixed as the stationary part,
while the other side is as motion part which intends to have
torsion shift corresponding to the stationary part. These
transducers are designed for symmetric use, i.e., use in measuring
torques in both directions: clockwise (positive torque) and
anti-clockwise (negative torque).
1913/1993 torque transducers can measure torque ranges from 30 Nm
to 300 Nm with an accuracy up to 0.1%fs. On request, these
transducers can be supplied as transmitters with conditioned
signals such as 0~5 V can be obtained by integrating a signal
conditioner PCB in the torque body.
1913/1993 torque transducers are widely used in torque wrench and
torsion measurement of shaft.
|Capacity||30Nm, …, 300Nm|
|Accuracy||up to ±0.1%fs|
Download the Datasheet of 1913/1993 Static Torque Transducers