Wet liquid sandblasting cabinet
The difference between a wet blasting and a dry blasting machine is
that the former can not be applied to cleaning grease and filth,
while the latter has no such problem. For the surface of a golf
work piece that needs to get rid of the material which rises in
temperature at blasting, the wet type is more suitable than the dry
type. The most important feature is the application of micro-powder
sand, in which the wet type can produce a particular result,
whereas the dry type is limited in this respect. Generally when the
sand size is bigger than 400#, consideration should be taken in the
application of a wet blasting machine.
Characteristics of Wet blasting：
1. Using very fine sand apply to the surface treatment of precision
work piece.9. Equipped with a clean-water cleaning device, not only for
cleaning the work piece but for preventing sand material from being
brought out of the sand cabin.
2. With the application of the recycle of blasting liquid, the
consumption of sand becomes lower and the nozzle will be taken
small wear and the operation cost is more economic.
3. With excellent airtight capability, no pollution of dust will be
4. Simple operation, few failures produced; space closed, low
5. With the function of window-cleaning, at use the visibility is
6. The body is made of stainless steel which wearing well.
7. If necessary, an inhibitor can be added into the blasting liquid
to prevent iron work pieces from rusting.
8. Provided with an anti-dust and waterproof fluorescent lamp.
Note: the material of cabin of wet sand blast has fiberglass and
|LS6868W liquid wet sandblaster (stainless)|
|LS9070W liquid wet sandblaster (glass steel)|
|LS9090W liquid wet sandblaster(stainless steel)|
SBE208BA liquid wet automatic shot blasting booth
Liangshi designs and manufactures three sets of stainless steel
liquid wet automatic shot blasting booth for CNNC, the three sets
of liquid wet automatic shot blasting booths are inspected and
received by CNNC under strict process of nuclear system. The
nuclear spare parts and liquid wet shot blasting booth are made of
304L stainless steel, hyperfine wet automatic shot blasting system
and famous brand appliance elements, to insure that the wet
automatic shot blasting booth can be used for 40 years.
|LS1212W liquid wet sandblaster(glass steel material)|
Belt conveyor through-type liquid wet automatic sandblaster
Belt conveyor through-type liquid wet automatic sandblaster mainly used in the damage process of crystal, automatic crystal
liquid wet sandblaster configures 8pcs suction wet sandblast gun,
the body of sandblasting booth is made of stainless steel, which is
anti-corrosion and wear-resistant and can extend the lifetime of
machine. The transmission power of material feeding and unloading
mechanism of automatic crystal liquid wet sandblaster is adjustable
by variable frequency, the belt conveying mechanism and spray gun
mechanism are all adjustable by variable frequency, in order to
meet even, stable, high efficient sandblasting treatment roughness
of whole set of liquid wet automatic sandblaster.
Liangshi applies the advanced online sandblasting technology to
equipment, designs full automatic chip online pass-type liquid wet
sandblaster, up to the requirement of chip sandblast precision;
Liangshi is at the top level of chip sandblasting technology, this
automatic chip loss machine can fully replace imported homogeneous
products, and Liangshi has an advantage on the price of equipment.
Custom-made exclusive suction type sandblasting cabinet last
Environment protection sandblasting cabinet series next