1, the machine is a automatic rotating, variable frequency speed
control, continuous tabletting machines. It is mainly used in
pharmaceutical industry for the manufacture of tablets, also is
applicable to chemical, food, electronics and other industrial
sectors will be pressing granular raw materials into tablets.
2, the machine is suitable for powder containing quantity (more
than 100 meshes) pressing
granular raw material of not more than 10%. This machine is not
suitable for semi - solid, wet granule, low melting point,
hygroscopic materials and non granular powder compaction.
number of dies
The maximum compression pressure
Maximum tablet diameter
The maximum depth of filling
The maximum thickness of tablet
6—15 ten thousand pieces/hour
Medium mould diameter
Diameter of up and down punch pole
Working Diameter of the Turntable
Length ofup and down punch
Motor power (kw)
Host net weight
1. structure and properties
2. It use variable frequency motor speed controlmake the turntable rotate by worm and worm gear driven. Rotary
turntabledrive the die to run clockwise. Every die though up and
down guide rail and pinch roller so as to complete the process of
charging, filling, tabletting and end product.
3. The pressure, filling, slice thickness and speed of the machine
are adjustable. All modulatory handwheelare one the front of the
machine with operation panel instructions.
4. Drive organization of ZP35D tablet press machine and the
crushing chamber is completely isolated so as to ensure that the
tablets conform to GMP requirements.It adopts non-toxic, no
corrosion of stainless steel plate to Isolate other partsin the
tablet pressing chamber.Those sealing device are all around ,can
prevent contamination from outside world.
5. There are unloading device Upper pressure roller,the pressurecan
be adjusted. When the punch work pressure exceeds a preset
pressure, we can compress spring to unload . Buzzer will send out
acoustooptic signals .Then the machine stop and Prevent damage of
6. Submerged lubrication is used for the worm and worm gear to
extend service life.
7.Those upper guideway and worm drive,hopper, feeder, filling rail
and other spare parts are available with ZP33tablet press
machine.This die conforms to the standard "JB20022-2004", is
available with the ZP33, 19 type tablet press machine.
8.The machine is on either side of the board and back board are
available dedicated keys to open, the machine repair and
maintenance more convenient.On both sidesplates and back plate can
be open byprivate key in order to convenient of repairs and
The reasons of common failures and troubleshooting
Break down phenomenon