45° Stone Mitre Clamp enlarge type
45° Stone Mitre Clamp enlarge type is used for larger stone sheet
Product Name: 45° Stone Mitre Clamp enlarge Type (Metal handle with nylon feet)
Max Processing Height(mm)
1.45Mitre Clamp is mainly use for the stone sheet stitching, It can
aslo used for other similar sheet of 45 stitching.
2.When two workpieces are processed into a 45 edge bevel, then
clean the 45 face of workpiece, evenly coated with adhesive, then
put two workpiece of 45 bevel face assembling together, and the two
45°workpiece fit into a 90 with each other, use the fixture in
plastic extrusion seam stitching.
3.First, put the bottom of width stone on the fixture work surface
which with white rubber, the side of the narrow stone close to the
90 inside of the fixture.
4.Then two binder lever can be adjusted by adjusting spring device
access to the top position of the workpiece,then rotating the screw at the top of the binder lever to put
pressure in place to maintain the fixture locked position for a
certain time, until the workpiece fully bonded joints, solid,and then release the fixture.
- Last one：Stone Sink Hole Saver
- Next article：45° Stone Mitre Clamp(Plastic handle with metal feet)
Related tags：45° Stone Mitre Clamp enlarge type