|The sprinkler wagon is the mechanism equipped with two wheels and
installed with sprinkler head, pulled by PE tube to do sprinkling.
The sprinkler wagon can be automatically lifted to the transport
position at the end of each irrigation, and the transmission system
is automatically closed by the connecting rod. When the sprinkler
wagon is automatically lifted and the drive is off, it will be
covered by transport protection rack. If the machine is equipped
with a shut - off valve, water will also be closed. When all the
parts are turned off, the machine can be moved to the next working
place to work.|
The sprinkler wagon is up to 1.5 meters from the ground, thus it
will not damage the growth of crops. The distance between two
wheels can be arbitrarily regulated within 1.3 to 1.5 meters.
I. Combined symmetrical wheel type sprinkler wagon
Large rim can protect crops to the maximum, even operation in dense
herbaceous crops. The distance between wheels can be arbitrarily
adjusted according to the existing line space of crops. The
advantages of this sprinkler wagon include adequate width
adjustment range and the stability of the performance. If the
pressure of the water supply is very low, it can use two sprinkler
heads to adjust the sprinkling flow.
Ⅱ. Combined symmetrical skid type sprinkler wagon
Whether on the slope or on the soft soil, the skid improves the
movement stability of the sprinkler wagon in the whole operation.
Ⅲ Symmetrical and asymmetrical wheel type sprinkler wagon
The conversion between symmetric and asymmetric wheel is to prevent
damage to the crops in the releasing and collecting process of PE
pipe. A notice type pulling rod that can be equipped on all kinds
of tractor can be applied to pull the asymmetric sprinkler wagon.