Mini chaff cutter, also called silage/forage chopper, as its name says, is a small size fodder cutting machine used in
small scale farms to chop dry or wet grass,
corn/wheat/cotton/soybean stalk into small pieces to feed cow,
horse, pig, rabbit, sheep, and chicken. Its production capacity is
400-1200kg per hour.
Mini Chaff Cutter Introduction：
Mini hay cutter is designed to minimize wastage of fodder, being a
good helper for individual farmers as it can process all kinds of
grasses and straws. This chopper machine is with small size but
high efficiency in cutting digestible animal feed. It is cheap and
movable with 4 wheels design, taking customer experience into full
Small scale chaff cutter can be classified into 3 models: 9ZP-0.4, 9ZP-0.4A, 9ZP-0.4B,
according to tiny moderation in its functions. 9ZP-0.4A chaff
cutter adopts four blades, 9ZP-0.4B six blades as the cutting
device. operators don’t need to change belt pulley. Structure of
the small silage/forage chopper is compact and reasonable. The
whole frame adopts the 2.7mm thickened steel plate, blades made of
manganese steel, which makes the cutting effect better.
No. Of Blades: 4
No. Of Blades: 6
Mini silage chopper is equipped with gear level, the function of which is to change
the length of the fodder by the way of adjusting it instantly. Its
production capacity depends on the feed raw material & its
Dry rice straw
Dry corn stalk
Green corn stalk
Moisture Content (%)
Production Capacity (kg/h)
Particle size (mm)
Features of 9ZP-0.4 Mini Chaff Cutter：
1. Good performance and high efficiency. Because the inlet is
widened, so the average output of the mini chaff cutter can be
reached at 400-1200kg/h.
2. Small size, light weight. For users, easy to operate and move by
3. The grasses-cut length can be adjusted. It can process different
lengths of fodder, which meets the different needs of customers.
4. The customers can choose to equip with 4 pieces of blades, or 6
5. High stability, lower noise and long service life.
Notice of Gear Shifting：
When the chaff cutter is working, don’t change the gear.
Turn off the power before gear shifting.
Change the gear only when the machine is completely stopped and
Push the shift lever to change the gear. If the two gears are
misplaced, just turn the belt slightly.
Don’t hit the handle during gear shifting.
When the machine stops unstable, don’t change the gear level.
Basic principles of Safe Hay Chopper Operation：
Check whether the lubrication area has any oil before starting the
machine. Before working, the gear and the oil hole in the bearing
room should be dripped into a small amount of oil, usually adding
oil in 2-3 hours.
Read the instructions carefully before starting the machine.
The operator should be standing on the side of the feeding port.
During the operation of the machine, the hand is not allowed to
reach into the feeding port. If the machine is unstable, don’t open
the cover. No power on if the cover is not covered or the hopper is
Strictly prohibits the machine excess load work. When the feed
inlet is plugged, turn off the machine immediately. Don’t feed the
raw materials forcibly by hand. Operators should feed evenly.
Select the right mating power according to the instructions. It’s
forbidden to improve the spindle speed and remove the protection
device without permission.
The juveniles and old people can’t start this machine. Staffs can’t
operate the machine when drunk or overtired.
Working Video of Mini Chaff Cutter Machine:
Technical parameters for Small