What is No-tillage Corn Fertilization Seeder?
No-tillage corn seeder, a multifunctional integral agricultural
machine, is matched with four-wheel tractors for seeding precisely
and banding crystalline fertilizer in no-tillage fields of plain or
hill areas. It realizes the ditching, deep scarification,
fertilizing, seeding and soil covering at the same time.
The one-time and whole layer placement of fertilizer saves much
labor, improves the fertilizer utilization rate and increases the
grain output and rural income. We also offer rotary tilling and
fertilizing corn seeder for your choice.
Main Features of No-tillage Corn Seeder
* Good operational performance satisfies the sowing request of
* Adopt three point linkage, convenient to operate.
* Fertilizing in different layer, and the depth of base fertilizer
reaches to 25cm.
* High seeding precision, qualified rate of seeds is above 80%.
* Seeder adopts profile modeling structure, ensuring the uniform
seeding and the same depth.
* The seeding capacity, row space and working width are adjustable.
* Widen the distance between openers, avoiding the blockage.
* Single grain or double grain sowing guide wheel for your choice.
Single grain sowing guide wheel is suitable for selected seeds, and
the other for general seeds.
Use and Maintenance of Corn Seeder
1. Do the test before seeding, and adjust the corn seeder to the
expected condition. Then check the depth of seeding regularly when
the machine works normally.
2. Observe the operation condition of the corn seeder’s every part
at any time. Timely tighten the loose parts.
3. Observe the working condition of opener. Stop the machine
immediately if there is the phenomenon of grass tangling, blockage
4. Grease the lubrication points, avoid accelerating the abrasion.
5. After the work quarterly, clean the mud thoroughly, tighten the
bolts, change the seriously worn spare parts, add lubricates, oil
the cutting edge of opener in case of the rust and store the seeder
in a cool, ventilated and dry place.
No-tillage Corn Seeder Technical Parameter