Advantages of Cyclone Dust Collector System in Chaff Cutting
Dust collectors play a major role in helping poultry farmers meet
these requirements and improve both indoor and outdoor environments
by capturing a high percentage of the particles emitted by
hay/paddy straw cutting process. Cyclone collectors are gaining in
popularity. A cyclone dust collector can be an essential
health-related part of chaff cutting shop setup-especially if you
have large amounts of chaff cutting work there.
Before introducing the dust-collecting hay/paddy straw cutter machine, let’s have a brief introduction of 9ZF series commercial chaff cutter. In the previous articles, we have detailed that 9ZF series chaff
cutter has two functions: silage fodder cutting and grain milling.
Therefore, we call it: Chaff Cutter cum Grain Grinder. The model
number of the duct-free chaff cutter is 9ZF-400-30B, which means
that it also has multi-functions, both cutting and grinding. Its
full name is commercial chaff cutter cum grain grinder machine with cyclone dust
9ZF-400-30B Hay/Paddy Straw Chaff Cutter Machine Introduction：
It is the only machine that equipped with cyclone dust-cleaning
system among 9ZF series chaff cutters. It has three main functions-
chaff cutting, grain milling and dust collecting. The machine is equipped with dust removal device, which avoids
dust pollution and greatly reduces the harm to human body. This
machine not only can process grasses and straws into coarse fodder,
but crush some granule grains into fine fodder, such as the corn,
sorghum, wheat and beans, etc. This machine is the most effective
and economical equipment for small and medium sized farms,
livestock and sideline processing farms.
Working Principle of 9ZF-400-30B Commercial Chaff Cutter：
At the end of the housing, a rolling bearing is used as the main
shaft. This machine is rotating at a high speed, which is driven by
the motor to drive the main shaft and the turbine fastened at the
main shaft. The machine is driven by the motor to drive the main
shaft and the turbine on the main shaft. Turbine and grinding block
constitute a reasonable and compact structure. So these raw
materials are strongly rubbed and crushed during the rotation, and
crushed again in the gap between the blade and grinding block.
Finally, the material is crushed to 1-50mm by adjusting the mesh.
In brief, the material is fed by the feeding chopper and gradually
crushed with the action of mesh and high-speed rotating hammer.
Under the effect of centrifugal force, the materials are leaked out
from the sieve holes and carried by the fan into the cyclone dust
collector. In the end, the finished materials are out from the
outlet of the cyclone dust collector.
9ZF-400-30B Hay Cutter Advantages：
1.No dust pollutionLow noise. This chaff cutter and grain grinder
is equipped with cyclone dust collector, which reduces to human
2.Wide application, strong practicability. This machine not only
can cut various grasses and straws, but crush many granular crops.
3.The processed materials are much softer, which is helpful for
livestock to absorb the forage.
4.It is a mufti-function combined chaff cutter machine. It has the advantage of good performance, cost-effective and high
5.Low energy consumption, high efficiency, smooth running and
Technical Data of 9ZF-400-30B Chaff Cutter Machine:
Main shaft speed